Hog Slat Inc. Newton Grove, NC USA December 2022 15 GROW-DISK™ Feed System GROW-DISK™ Corner Assembly Requirements The GROW-DISK™ Corners must be assembled in such a way that it meets all the following conditions. • The corners must be assembled so that the arrow on the guide wheel turns in the direction of transportation. Note: Mark the chain running direction at the conveyer tubes in front or behind of each corner. • Conveyer tubes must be inserted into the corner up to the tube stop. • Conveyer tubes must be supported in front of and behind each corner. • Distance between the corners must be at least 4 feet. • Distance between the input side of drive unit to corner must be a minimum of 8 feet. • Distance between the output side of drive unit to corner must be a minimum of 4 feet. • Maximum 24 corners per system.
RkJQdWJsaXNoZXIy MTA3MzU=