Hog Slat Inc. Newton Grove, NC USA December 2022 29 GROW-DISK™ Feed System GrowerSELECT HS693 Feed Line Control Unit Installation 1. (Figure 1) Illustrates a typical installation example of the HS693 Feed Line Control Unit. (The hopper/funnel will not be used.) a. Mount tube anchor to one side using 4 of 5/16” x 3/4“ bolts with 4 flat washers. b. Mount auger power drive unit gear box (1) secured with 4 of 5/16” x 3/4” bolts and 4 flat washers. FIGURE 1 2. (Figure 2) Illustrates the installation of the HS693 Control Unit on top of the Chain Disk Fill Hopper a. Hang the assembled Control Unit (2) with supporting chains (3) over the Chain Disk Fill Hopper (4) b. Connect the Control Unit (2) on top of the Chain Disk Fill Hopper (4). c. Attach conveyer tubes (6) to Chain Disk Fill Hopper (4) with the tube couplers (5). FIGURE 2
RkJQdWJsaXNoZXIy MTA3MzU=