Hog Slat Inc. Newton Grove, NC USA December 2022 32 GROW-DISK™ Feed System GROW-DISK™ HSCD200 System Controller The HSCD200 Chain Disk Controller is designed to operate a chain disk feeding system controlling the chain disk drive motor, auger motor and feed drop mechanism. The controller touchscreen menus make it easy to setup, operate and review status and run-time history. Versatile operation modes allow the controller to operate in many different farm applications requiring continuous or timed scheduled feeding along with dump control outputs. On-screen information aids in set-up while a convenient data port allows for quick importing and exporting of settings as well as export of run-time history. A proxy switch is used to detect feed in the last drop tube or at the end of the feed line. A toggle switch can be connected to manually stop the system without generating an alarm. The system features a current sensor input used for overload protection on the feeding system. (Refer to manual HSMANUAL-163 HSCD200 User Manual) Recommended HSCD200 System Controller Settings (amps, delay times, etc.) a. Recommendation for Amps i. Max Current 6.0 Amps (Based on FLA of drive motor) ii. Window Size 1.0 Amps iii. Critical Amp Draw 8.0 Amps b. Recommendation for Auger Delay for 900 feet system (speed of chain 115 feet/min) i. 8 minutes c. Recommendation for Feed Sensor Bypass (minimum 30 seconds less than auger delay) i. 7 minutes d. Recommendation for Shutdown Delay i. 30 seconds e. Recommendation for Maximum Runtime i. Average feeding time plus 10 minutes
RkJQdWJsaXNoZXIy MTA3MzU=