Hog Slat Inc. Newton Grove, NC USA December 2022 46 GROW-DISK™ Feed System GROW-DISK™ Feed System Maintenance Caution: Always disconnect power before performing maintenance on system. Only qualified and trained personnel are allowed to make the electrical connections. To prevent injuries, the feed transportation system must be isolated from the power system. The system must be safeguarded against accidental restart. Caution: Drive wheel must come to a complete stop, before opening any drive units. Product Maintenance description Maintenance interval 1 month 3 months 6 months 12 months Chain Disk Drive Unit Remove dust from the drive unit motor fan X Remove feed residue from inside drive unit X Check wiring for damage X Gearhead Check for oil leakage X Switches Check functioning of Chain Safety switch X Check functioning of Door Safety switch X Check wiring for damage X Wheels Check Idler Tensioning Wheel for wear X Check Idler Tensioning Wheel is turning easily X Check Drive Sprocket Wheel for wear X Check Nylon Bushings on sliding rods for wear X Conveyer Chain Check tension of conveyer chain X Check Chain Disk for wear or any damages X Chain Disk Fill Hopper Check Cover is in place and secured X Remove feed residue from inside Hopper X Verify that Chain Disk is not hitting the Hopper X
RkJQdWJsaXNoZXIy MTA3MzU=