Hog Slat Inc. Newton Grove, NC USA December 2022 47 GROW-DISK™ Feed System Product Maintenance description Maintenance interval 1 month 3 months 6 months 12 months Corners Check Corner for any leakage X Check functionality of Corner Wheels X Remove feed residue from inside corner X Conveyer Tubes Check Conveyer Tubes for any leakage X Check to verify Supports for damage X Outlet / Sow Drops Check Outlet / Sow Drops for any feed leakage X Check functionality of Slides X Check functionality of Sow Drop Feed Measure Slide X Check Drop Tubes / Hoses for any damage X Proximity Switch Check functionality of proximity switch X Check wiring for damage X Check control tube for damage X Chain Disk Controller Check functionality of Controller X Check wiring for damage X GROW-FLEX™ AUGER System Motor Check Cover is in place and secured X Remove dust from the drive unit ventilator X Remove feed residue from inside drive unit X Check wiring for damage X Gearhead Check for oil leakage X Switches Check functioning of Toggle switch X Check wiring for damage X Unloaders Check Unloader for any leakage X Check Cover is in place and secured X Check to verify that no Flexible Auger is hitting the Unloader X Remove feed residue from inside Unloader X Tubes / Elbows Check PVC Tubes and Elbows for any leakage X Check to verify Supports for damage X
RkJQdWJsaXNoZXIy MTA3MzU=