Hog Slat Inc. Newton Grove, NC USA December 2022 9 GROW-DISK™ Feed System GROW-DISK™ Feed System Specifications Table below shows the technical specifications of the GROW-DISK™ Feed transportation system and the critical design criterias. The GROW-DISK™ Feed System must not exceed any of these design criterias. Refer to GROW-FLEX™ AUGER SYSTEM Manual (Hog Slat part # HSMANUAL-020) for proper installation of the GROW-FLEX™ AUGER SYSTEM. GROW-DISK™ Applications Breeding / Gestation *Maximum Effective Length 1,800 Ft Nursery / Finisher *Systems over 1200 Ft will require a motor soft starter. Farrowing GROW-DISK™ Drive Unit Motor Size 1.1kW (1-1/2 HP) 60Hz Single Phase 1725 RPM Speed 115 Ft/minute Maximum Runtime 4 hours / day GROW-FLEX™ AUGER System Model 75 (300) Gear Motor output speed 156 RPM Feed Delivery (single bin) 21.5 Lbs/minute GROW-DISK™ Corner Maximum qty. per system 24 Effective length reduction 25 Ft/corner GROW-DISK™ Conveyer tube Dimensions 2.375" O.D., 20 Ft long Material Welded galvanized steel tube Maximum installed length 1,700 Ft GROW-DISK™ Conveyer Chain Dimensions 1.732" O.D. Disk Length per bag 164 Ft Running Direction None Maximum Runtime = Maximum daily feed requirement divided by Feed Delivery per minute Effective Length Calculation Effective Components Qty. Multiplier Length GROW-DISK™ Conveyer tube 320 1 320 GROW-DISK™ Corner 4 20 80 400
RkJQdWJsaXNoZXIy MTA3MzU=