GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA August 2016 42 Grow-Flex TM Feed System Cover Plate Installation The cover plate is installed after installation of the auger in the tube. See Figure 20. To install the cover plate: 1. Loosen wing nuts to end of studs. 2. Start lower side of cover plate in boot opening. 3. Slide the cover plate up as far as possible so that plate catches top of boot opening. 4. Hold the cover securely while tightening the wing nuts. Figure 20. Cover Plate Installation (End View)