GrowerSELECT® Installation Manuals Binder
Hog Slat Inc. Newton Grove, NC USA August 2016 4 Evaporative Cooling System Framing Instructions Figure 1 ACTUAL HEIGHT OF EVAPORATIVE COOLING PAD MAY VARY SLIGHTLY, THEREFORE PROPER HEIGHT OF THE SYSTEM SHOULD BE VERIFIED UTILIZING PADS TO BE INSTALLED (LUMBER NOT INCLUDED) Figure 1 above shows the typical installation dimensions for a wall mounted system. Table A provides appropriate dimensions for varying Pad heights. Please note that in Concrete Installation the 2”X10” and 2”X4” base boards should be replaced with a single run of 2”X8” baseboards. AIR FLOW MUST PASS THROUGH SYSTEM IN DIRECTION OF ARROW ABOVE. FAILURE TO DO SO CAN RESULTS IN ISSUES DURING INSTALLATION AND OPERATION
Made with FlippingBook
RkJQdWJsaXNoZXIy MTA3MzU=