GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA August 2016 15 Evaporative Cooling System End Panel Assembly Instructions 1. Using methods in section shown above, insert cement and place final Splice on the end of the trough as shown below in Figure 15. 2. Cut 2”X4” Cap to appropriate length according to Table F above. 3. Using screws ( 80509 ), toenail 2”x4” Cap into the rough opening ensuring it mounts flush to Trough End with Nipple and in the middle of the last Trough Splice as shown below in Figure 15. 4. Again using supplied screws ( 80509 ),fasten End Panels to 2”X4” Cap as shown below. Fasteners should be inserted through the holes in the side of the End Panel. Figure 15