GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA December 2014 12 Air Storm Fans Operation At all times during operation fan orifice should be free of debris. In the event any component of the fan is compromised discontinue use immediately and contact your local Hog Slat representative. During operation shutter doors should open completely and rotate a full 90 degrees. In the event shutter doors are not opening completely force door open 90 degrees. (Slight deformation of the corner of the shutter door lip is expected and will not affect the performance and or life of the shutter) Maintenance In order to begin any maintenance or service to the fan, power must be turned OFF and all moving parts must come to a complete STOP before accessing. All parts inside of the fan housing are accessed by removing the exit wire guard and inlet shutter. Once service is complete, clean excessive build-up from parts. Excessive dust and dirt on parts can cause vibration in the propeller and overheating of the motor. Before beginning operation again, ensure that all safeguards are back in place and all foreign objects are free from the area. Performance Hog Slat Inc. takes great pride in supplying our customers with fans that meet or exceed their performance numbers. This is achieved by testing fans from the production line and continually working to maintain consistency in test data. BESS LABS TEST NUMBER 14520 NOVEMBER 17, 2014 With Cone Static Pressure (in.H2O) Airflow (cfm) Rpm Volts Amps Watts cfm/Watt 0.00 27800 544 230.4 5.77 1284 21.6 0.05 26000 542  230.3  6.02  1340  19.4  0.10 24200 540  230.2  6.29  1399  17.3  0.15 22000 539  230.2  6.53  1454  15.1  0.20 18800 537  230.0  6.73  1495  12.6  0.25 14300 537  230.1  6.77  1506  9.5  0.30 10000 531  230.2  7.21  1603  6.2