GrowerSELECT® Installation Manuals Binder

Hog Slat Inc. Newton Grove, NC USA Feb 2016 1 Ventilation System HS583-SWRLR Latch out / Auxiliary Switch Kit Installation and Operating Instructions The HS583-SWRLR Auxiliary Switch Kit for HS583 Series curtain / Vent machines provides a Normally Open and Normally Closed switch contact activated by the load block Installation Instructions: Install trigger bracket to load block per below steps. 1. Bottom section of trigger bracket HS583-SWRLR-4. Place underneath load block as shown. Rotate to side to provide clearance and slide underneath load block. Position bottom bracket toward the center of the load block just past the inboard cable set screw as shown below. 2. Slide top section of trigger bracket HS583-SWRLR-4 through slot on bottom section as shown. Slide all the way through until screw holes on each bracket align. Insert provided 10-32 x 1” hex head screw and tighten. Part # Description EL1194 Switch, double fork roller HS583-SWRLR-1 Bracket assembly 616555 8-32 x 1 ¼ Phillips screw HS583-SWRLR-4 Bracket, Trigger Assembly 61646 ½” Liquid tight connector