17 FEED SYSTEMS MULTIFLOW DRIVE UNIT HS643A Drive Unit MF Drag Auger, with gearhead - HS643-14 Drive Unit MF Drag Auger, no gearhead - 1) HS643-3 Wear Shoe-MF Drive 8210 2) HS643-12 Weldment, Base Drive Unit 8207 3) HS643-13 Weldment, Cover, Front Unit-MF Drive 8208 4) HS643-9 Hub, Drive Gear-MF Drive 8213 5) HS643-5 Sprocket, Drive 8463 6) HS643-8 Brace, Auger-MF Drive 24674 7) 23253 Screw, Socket Hd Cap 5/16” 18 thread x 3/4” 6850-1 8) HS643-10 Pin, Dowel-MF Drive 8699 When installing GrowerSELECT Multiflo Drive Unit, must install 4 drive units per feed line. Use of Original Equipment Manufacturer part numbers is for reference only. HS643-3 Wear Shoe - Multiflo Drive WEAR SHOE HS643-10 Pin, Dowel - Multiflo Drive PIN HS643-9 for Multiflo Drag Auger HUB HS643-5 for Multiflo Drag Auger DRIVE SPROCKET 9) HSGR021 Gear Head 62/52 RPM at 60/50 Hz-78 3261-9 10) HS643-2 Connector, Base-MF Drive 9636 11) 60500 Bolt Hex Cap ¼-20 x ½ Zn 1487 12) 60680 Nut, Lock Hex Nylon Insert ¼-20 Zn 1269 13) 80518 Screw Self Drilling #10-16 x 5/8” Zinc 3037 14) 616512 Screw, Slotted Hex Machine 10-24 x 5/8” Zinc 4416-3 15) 1137014 Nut, Hex Nyloc 10-24 Zinc 1560 16) 60597 Washer, Lock 5/16” Zinc 547 17) 60508 Bolt Hex Cap 5/16” -18 x ¾” Gr. 5 Zinc 2046 18) HS643-4 Weldment, Connector End 8211 DESCRIPTION PART NUMBER QTY ITEM WEAR SHOE-MF DRIVE 1 HS643-3 1 Weldment, Base, Drive Unit 1 HS643-12 2 WELDMENT, COVER, FRONT U 1 HS643-13 3 HUB, DRIVE GEAR-MF DRIVE 1 HS643-9 4 SPROCKET, DRIVE 1 HS643-5 5 BRACE, AUGER-MF DRIVE 1 HS643-8 6 Screw, Socket Hd Cap 5/16" 18 2 23253 7 PIN, DOWEL-MF DRIVE 1 HS643-10 8 Gear Head 64/53 RPM At 60/50 1 HSGR-018 9 CONNECTOR, BASE-MF DRIVE 1 HS643-2 10 Bolt Hex Cap 1/4-20 X 1/2 Zn 8 60500 11 Nut, Lock Hex Nylon Insert 1/4 4 60680 12 Screw Self Drilling #10-16 x 5/ 6 80518 13 Scew, Slotted Hex Machine 10- 2 616512 14 Nut, Hex Nyloc 10-24 Zinc 2 1137014 15 Washer, Lock 5/16" Zinc 4 60597 16 Bolt Hex Cap 5/16"-18 X 3/4" G 4 60508 17 Weldment, Connector End 2 HS643-4 18 1 2 3 4 A B C D TITLE DESIGNED DRAWN CHECKED APPROVED DATE c HOG SLAT Incorporated - DATE(S) SHOW THIS COPYRIGHT DRAWING AND THE CONFIDENTIAL INFORMATIO ARE THE PROPERTY OF HOG SLAT Inc. AND SHALL NOT REPRODUCED IN ANY MATERIAL FORM NOR BE DISCLOSED T WITHOUT THE PRIOR WRITTEN CONSENT OF HOG S T.FULCHER T.FULCHER F.HARRIS F.HARRIS 8/6/2015 HS643 Assembly INTERNAL MANUF NUMBER SHEET 1 OF 1 DWG. HS TOLERANCES UNLESS OTHERWISE SPECIFIED: .X = .125 .XX = .032 .XXX = .005 ANGLES = 2 [X] = 3 [.X] = .8 [.XX]= .13 LAS TOLERANCIAS A MENOS QUE SE INDIQUE LO CONTRARIO: MATERIAL SEE NOTES SCALE 11 15 6 13 14 18 2 9 17 1 10 12 7 5 8 4 3 16 #HS643-14 Item# Description Chore-Time® Item# Description Chore-Time® Item# Description Item# Description Item# Description Item# Description Item# Description Chore-Time® HSP05 Pinion Straight 1/2” C3249 PINION Multiflow Drive Unit
RkJQdWJsaXNoZXIy MTA3MzU=