2024 Hog Slat/Georgia Poultry Retail Product Catalog

2024 PRODUCT CATALOG

2 WWW.HOGSLAT.COM 60-84 85-111 112-117 118-129 130-134 135-147 Plumbing 148-161 Medicators 162-175 Ventilation Controls 176-204 Ventilation Fans 205-241 Curtains and Inlets 242-269 Heating 270-282 Building Materials 283-296 Lighting & Electrical 297-309 Animal & Manure Handling 310-337 Supplies 3-59 Feed Systems Feed Systems QUICK INDEX Poultry Nests & Egg Handling Swine Steel Equipment & Flooring Swine Feeders Poultry Watering Swine Watering GrowerSELECT®, Georgia Poultry Equipment Co.® are trademarks owned by Hog Slat Inc. Replacement parts listed with these marks are designed to fit and function in place of original equipment manufacturers replacement parts. Chore-Time® and Roxell® are the registered trademarks of CTB INC., a company not affiliated with Hog Slat Inc. AP®, Cumberland® & Hired Hand® are registered trademarks of The GSI Group, LLC, a company not affiliated with Hog Slat Inc. AcmeFan® is the registered trademark of Acme Engineering & Mfg. Corp. INC., a company not affiliated with Hog Slat Inc. Aerotech Ventilation Systems® is a registered trademark of Munter Corporation, a company not affiliated with Hog Slat Inc.

3 GROWERSELECT 16 14 4 6 13 12 9 8 7 3 2 1 15 11 10 FEED SYSTEMS Model Tube Dia (OD) Capacity Lbs /Min Motor Sizing/Hp Max System Length Max Extension Length MODEL 55 2-1/4” 15 1/3 150’ 185’ 1/2 250’ 285’ MODEL 75 3” 50 1/2 80’ 125’ 3/4 150’ 185’ 1 200’ 245’ MODEL 90 3-1/2” 100 1/2 30’ 65’ 3/4 90’ 125’ 1 150’ 185’ MODEL HR 3-1/2” 50 1/2 30’ 55’ 3/4 90’ 105’ 1 150’ 185’ 1) Upper Boots • Fits 16” bin openings. Available in three different material types. • Clear polycarbonate, Translucent polyethylene or black polyethylene. • Black double straight boot has a 14” diameter. Hardware Package Includes: 18) 5/16” x 3/4” zinc plated bolts, washers & nylon nuts. Item # Description Chore-Time® AP® HS524 Clear 30° 4347C FLX-2194C HS793T Translucent 30° - FLX-2194T HS793 Black 30° 4347 FLX-2194 HS525 Clear straight 6093C FLX-2195C HS794T Translucent straight - FLX-2195T HS794 Black straight - FLX-2195 HS662 Black double boot - FLX-4869 Use of Original Equipment Manufacturer part numbers is for reference only WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Item # Description Chore-Time® AP® HS530 Hardware pkg. upper boot - FLX-2196

4 WWW.HOGSLAT.COM A) Single Unloader with Anchor Bearings and Transfer Plate HS556KIT Model 55 9313 N/A FLX-4682 HS520KIT Model 75 36442 N/A FLX-4684 HS520SSKIT Model 75 (Stainless) N/A N/A HS520PKIT Model 75 (pellet) N/A N/A FLX-5212 HS557KIT Model 90 9301 N/A FLX-4686 HS557HRKIT Model HR 38507 N/A FLX-4687 HS554KIT Model 108 34336 N/A HS220SOKIT Model 220 N/A FLX-4682 9313 HS300SOKIT Model 300 N/A FLX-4684 36442 HS350SOKIT Model 350 N/A FLX-4686 9301 HS522KIT Model 55 9315 N/A FLX-4898 SINGLE SINGLE TANDEM Item # Description Replacement Replacement with CTB Direct A.P. Direct Compatible TWIN TWIN TANDEM Part Number Description Replacement Replacement with CTB Direct A.P. Direct Compatible B) Single Tandem Unloader with Transfer Plate HS556TKIT Model 55 N/A N/A FLX-4408 HS520TKIT Model 75 36590 N/A FLX-2243 HS520SSTKIT Model 75 (Stainless) N/A N/A HS520PTKIT Model 75 (pellet) N/A N/A FLX-5213 HS557TKIT Model 90 9301 N/A FLX-2178 HS557HRTKIT Model HR N/A N/A HS220STKIT Model 220 N/A FLX-4408 HS300STKIT Model 300 N/A FLX-2243 HS350STKIT Model 350 N/A FLX-2178 Item # Description Replacement Replacement with CTB Direct A.P. Direct Compatible C) Twin Unloader with Anchor Bearing, Transfer Plate & Baffles HS555KIT Model 55 9314 N/A FLX-4694 HS521KIT Model 75 36389 N/A FLX-4696 HS521SSKIT Model 75 (Stainless) N/A N/A HS521PKIT Model 75 (pellet) N/A N/A FLX-5214 HS558KIT Model 90 36398 N/A FLX-4698 HS558HRKIT Model HR 38506 N/A FLX-4699 HS220TOKIT Model 220 N/A FLX-4694 HS300TOKIT Model 300 N/A FLX-4696 36389 HS350TOKIT Model 350 N/A FLX-4698 Item # Description Replacement Replacement with CTB Direct A.P. Direct Compatible D) Twin Tandem Unloader with Transfer Plate HS555TKIT Model 55 N/A N/A FLX-3937 HS521TKIT Model 75 N/A N/A FLX-2586 HS521SSKITDT Model 75 (Stainless) N/A N/A HS558TKIT Model 90 N/A N/A FLX-2181 HS558HRTKIT Model HR N/A N/A FLX-4472 HS220TTKIT Model 220 N/A FLX-3937 HS300TTKIT Model 300 N/A FLX-2586 HS350TTKIT Model 350 N/A FLX-2181 Item # Description Replacement Replacement with CTB Direct A.P. Direct Compatible

5 GROWERSELECT E) Twin Unloader with Anchor Bearing & Double Transfer Plate HS555KITDT Model 55 N/A N/A FLX-4694DT HS521KITDT Model 75 N/A N/A FLX-4696DT HS521SSTKIT Model 75 (Stainless) N/A N/A HS521PKITDT Model 75 (pellet) N/A N/A HS558KITDT Model 90 N/A N/A FLX-4698DT HS558HRKITDT Model HR N/A N/A FLX-4699DT HS220TOKITDT Model 220 N/A FLX-4694DT HS300TOKITDT Model 300 N/A FLX-4696DT HS350TOKITDT Model 350 N/A FLX-4698DT Item # Description Replacement Replacement with CTB Direct A.P. Direct Compatible F) Twin Tandem Unloader with Double Transfer Plate HS555TKITDT Model 55 N/A N/A FLX-3937DT HS521TKITDT Model 75 N/A N/A FLX-2586DT HS521SSTKITDT Model 75 (Stainless) N/A N/A HS558TKITDT Model 90 N/A N/A FLX-2181DT HS558HRTKITDT Model HR N/A N/A FLX-4772DT HS220TTKITDT Model 220 N/A FLX-3937DT HS300TTKITDT Model 300 N/A FLX-2586DT HS350TTKITDT Model 350 N/A FLX-2181DT Item # Description Replacement Replacement with CTB Direct A.P. Direct Compatible DOUBLE TWIN DOUBLE TWIN TANDEM WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov 3) 10’ Straight PVC Tube Item # Description Chore-Time® AP® HSAT55-S Model 55, 2-1/4” OD 7955 PVC-1004 HSAT75-S Model 75, 3” OD 6516 PVC-1005 HSAT90-S Model 90, 3-1/2” OD 6293 PVC-1006 HSAT108-S Model 108, 4-1/2” OD 34547 - Item # Description Big Dutchman® Chore-Time® AP® HS527 3” agitator ball 3531 00404238 HS527W Wooden agitator -80mm 11-00-1023 3” Agitator Ball Item # Description Chore-Time® AP® CLAMP200 2” tube clamp 7084 - CLAMP225 2-1/4” tube clamp - S-4490 CLAMP300 3” tube clamp 6515 - CLAMP325 3-1/4” tube clamp - S-9186 CLAMP350 3-1/2” tube clamp - S-4319 CLAMP400 4” tube clamp 6721 S-4443 CLAMP450 4-1/2” tube clamp 34358 - CLAMP550 5-1/2” tube clamp - S-4494 Tube Clamps WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Transfer Plate and Slide Assembly Double Transfer Plate Assembly Item # Description Chore-Time® AP® HS523 Single transfer plate assembly 6284 BLK-11137 HS523SS Stainless steel single assembly - - Item # Description Chore-Time® AP® HS541 Double transfer plate assembly 36683 FLX-4234 HS541SS Stainless steel double assembly - - WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

6 WWW.HOGSLAT.COM Anchor Bearing Assembly Item # Description Chore-Time® AP® HSAB45UP Feedline 6817 07098932 HSAB55C Model 55 39405 FLX-4879 HSAB55 Model 55 - FLX-4646 HSAB55CF Model 55 - flag 39408 - HSAB75C Model 75 37346 FLX-4648C HSAB300 Model 300 - FLX-4648 HSAB350 Model 350 - FLX-4650 HSAB75-OS Model 300 (old style) - FLX-2227 NOW AVAILABLE IN STAINLESS STEEL Boot Body Weldments SINGLE TWIN QUAD Item # Description Chore-Time® AP® SINGLE HS220S Single Model 220 - FLX-4331 HS556A Single Model 55 7999 - HS556SS Single Model 55 (Stainless) 7999SS - HS300S Single Model 300 - FLX-4669 HS300S-SS Single Model 300 (Stainless) - - HS520 Single Model 75 36588 - HS520TSS Model 75 Single Tandem (Stainless) - - HS520SS Single Model 75 (Stainless) 36588SS - HS520-4 Insert Model 75 6524 - HS350S Single Model 350 - FLX-2053 HS557 Single Model 90 8873 FLX-2053 HS554 Single Model 108 30386 - TWIN HS220T Twin Model 220 - FLX-3938 HS555A Twin Model 55 7998 - Use of Original Equipment Manufacturer part numbers is for reference only. #HSAB75CP #HSAB45UP #HSAB55C #HSAB75C #HSAB90U #HSAB108 #HSAB108E #HSAB55CF #HSAB90S #HSAB90U-HR #HSAB300 #HSAB75-OS #HSAB55 Item # Description Chore-Time® AP® HSAB75CP M75 / pellet - - HSAB75C-1 Replacement Hub Mdl 75 - - HSAB90U-1 Replacement Hub Mdl 90 - - HSAB90U Model 90 35343 - HSAB90U-HR High Roughage (M90 Boot & M75 Auger) - FLX-4648HR HSAB90S Model 90 - Screener 35345 - HSAB108 Model 108 - Unrestricted 35766 - HSAB108E Model 108 - Restricted 35767 - #HSAB75C-1 #HSAB350 WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Slide Gate Item # Description Chore-Time® AP® HS523-12 Single, 11.31” x 6.6” 4357 - HS523SS-12 Single stainless steel - - HS523-17 Double, 11.31” x 3.125” - - HS523SS-17 Double stainless steel - - HS523-25 Single, 11.91” x 6.1” - FLX-4782 HS451 Double, 11.25” x 3.25” - FLX-4320 NOW AVAILABLE IN STAINLESS STEEL OR CLEAR PLASTIC Access Cover for Boot Weldments Item # Description Chore-Time® AP® HS526 Galv. access cover 6197 FLX-4239 HS526C Clear access cover - FLX-5127 HS526SS Stainless steel cover - - WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov #HS520-4 HS300T Twin Model 300 - FLX-4761 HS300T-SS Twin Model 300 (Stainless) - - HS300TB Twin Model 300 w/ baffles - FLX-4761B HS300TBSS Twin Model 300 w/ baffles (Stainless) - - HS521 Twin Model 75 36350 - HS521SS Twin Model 75 (Stainless) 36350SS - HS521T Twin Tandem Md 75 - - HS521TSS Twin Tandem Md 75 (Stainless) - - HS350T Twin Model 350 - FLX-2116 HS558 Twin Model 90 36354 - HS735 Twin Model 108 35617 - QUAD HS522 Quad Model 55 7980 - Item # Description Chore-Time® AP®

7 GROWERSELECT 9) Drop Adaptors • 100% Feed Drop Out • Secure hose clamp connections with overlapping seams to prevent water entry. • Fits existing brands of feed tubes. Our innovative manufacturing process forges a stronger, more durable auger with superior flexing and breaking strength that outperforms standard augers. #60665........................................................................1/4” x 3-1/2” galvanized #606655.................................................................................. 1/4” x 3-3/4” SS #60673........................................................................#2 twin loop chain, zinc #606733..........................................................................#1 twin loop chain, SS #60678....................................................................#2/0 twin loop chain, zinc #60399.................................................................................3” EMT clamp, zinc 7) Cup Hooks & 8) Chain & EMT Clamp #HS39187...................................................................Plastic wye drop adaptor 9) Plastic Wye Drop Adaptor • 3” x 3” x 3” 5) 45° PVC Elbows, 5’ radius Item # Description Chore-Time® AP® HSAT55-45 Model 55 34855 PVC-1101 HSAT75-45 Model 75 7285 PVC-1001 HSAT90-45 Model 90 7357 PVC-1002 HSAT108-45 Model 108 34546 - HSAT125-45 Model 125 - PVC-1003 Item # Description Chore-Time® AP® HSFA-44 Model 44 6820 FLXA-14375 HSFA-44D Model 44 drag auger - FLXA-1520 HSFA-55 Model 55 7961 FLXA-1520 HSFA-75 Model 75 4744 FLXA-2390 HSFA-75P Model 75 (pellet) - FLXA-2206 HSFA-90 Model 90 6942 FLXA-2710 HSFA-108 Model 108 30108 - HSFA-125 Model 125 - HSFA-125 6) Grow-Flex™ Auger Use of Original Equipment Manufacturer part numbers is for reference only. Drop tube part number combinations that make up the telescoping drops. A – Drop Tube Adaptor B – Top Tube C – Bottom Tube D - Clips 10) Drop Tube MODEL A B C D SINGLE TUBE 55 HS655 HSDT005 HSDT003 60638 HSDT005 75 HS675 HSDT005 HSDT003 60638 HSDT005 90 HS690 HSDT001 HSDT006 60638 HSDT001 HR HS690 HSDT001 HSDT006 60638 HSDT001 Control Unit HSDT001 HSDT006 60638 HSDT001 A D B C D Item # Description Chore-Time® AP® HSDT001 3.937” ID x 4.125” OD x 12’ - AP-1766 HSDT002 3” ID x 3.188” OD x 12’ 1932 FLX-2425 HSDT003 3.562” ID x 3.750” OD x 12’ 6381 FLX-2427 HSDT004 3.937” ID x 4.125” OD x 6’ - FLX-2428 HSDT005 3.313” ID x 3.5” OD x 6’ - FLX-2426 HSDT006 4.187” ID x 4.375” OD x 12’ - FLX-2429 Item # Description Chore-Time® AP® HS536 Model 55 24102-8 FLX-2699 HS531 Model 75 24102-2 FLX-2696 HS531P Model 75 /pellet - FLX-5210 HS537 Model 90 24102-3 FLX-2697 HS540 Model HR - FLX-2737 Item # Description Chore-Time® AP® 60638 4” for attaching drop tubes 41657 FLX-4278 11) Wire Pin Item # Description Chore-Time® AP® HS655 M55/220 43455C GAPCD-109 HS675 M75/300 43475C AP-2276 & FLX-2433 HS690 M90/350 43490C FLX-2434 12) Direct Drive & Tube Anchor WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov 4) PVC Tube Coupler Item # Description Chore-Time® AP® HSAT55-C Model 55 8029 FLX-2537 HSAT75-C Model 75 7084 FLX-2538 HSAT90-C Model 90 7085 FLX-2539 HSAT108-C Model 108 34557 - HSAT125-C Model 125 - FLX-2540

8 WWW.HOGSLAT.COM Item # Description Chore-Time® AP® HS693 Complete w/ relay - FLX-4496 HS693T Switch assembly w/ relay w/ delay - FLX-4496 HS593 Control unit w/o relay 6560 & 24482 HS593T Control unit w/o relay w/ time delay 6560 & 24482 HS591KIT Power head drop cone - FLX-2017 HS589 Switch Assy. w/o Relay 30953 - HS589T Switch Assy. w/o Relay w/ time delay 30953 HS689 Switch Assy. w/ Relay - FLX-4512 HS689T Switch Assy. w/ Relay w/ time delay - FLX-4512 Item # Description Chore-Time® AP® HS9021D8* 1/2 Hp Model 75 & 90 3259-50 FLX-2673 HS9022D8* 3/4 Hp Model 75 & 90 3259-136 FLX-2674 HS9023D8* 1 Hp Model 75 & 90 - FLX-3629 14) Direct Drive Power Units, 256 RPM Item # Description Chore-Time® AP® HS9020D1* 1/3 Hp Model 55 3259-34 FLX-2458 HS9021D1* 1/2 Hp Model 55 3259-39 FLX-2459 HS9022D2* 3/4 Hp aModel 75 & 90 3259-52 FLX-2460 HS9023D2* 1 Hp Model 75 & 90 3259-49 FLX-2461 15) Direct Drive Power Unit, 352 RPM Complete with motor, gear heads, pinion, 36” pigtail cord and 15 oz. bottle of gear oil. All units are 115/208-230 Volts. Use of Original Equipment Manufacturer part numbers is for reference only. 13) Control Unit WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Formulated to work with GrowerSELECT auger gear head unit to provide excellent lubrication properties. Oil contains extreme pressure (EP), anti-corrosion and anti-oxidation additives for prolonged gear life and smoother operation. 15 oz bottle. SAE 80W-90. #HS556KITA............................................Model 55 #HS520KITA...........................................Model 75 #HS557KITA............................................Model 90 #HS520PKITA.............................Model 75 Pellet #HS220SOKITA...................................Model 220 #HS350SOKITA...................................Model 350 #HS556KITB...................................................Model 55 #HS520KITB....................................................Model 75 #HS520PKITB....................................Model 75 Pellet #HS220SOKITB..........................................Model 220 Single Unloader w/ Anchor Bearings and Drop Adaptor 2.9” 16) Extension Unloader Kits Single Unloader Kits w/ Anchor Bearings and Control Unit Adaptor #HS520SSKITA....Model 75, Control Unit Adaptor STAINLESS STEEL Single Unloader Kit w/ Anchor Bearings & Galvanized Adaptor Unloader weldment and access cover constructed of 16 gauge, 304 stainless steel. Adaptor and clamps are galvanized. Gear Head Oil Item # Description Chore-Time® AP® HS450 Gear Head Oil - FLX-4471 #HS611-55..................................................................................................Mdl 55 #HS611.........................................................................................................Mdl 75 #HS624.......................................................................................................Mdl 90 Body Only Control Unit without Electrical Box Use with extension unloader kits with control unit adaptor. 1 1 2 2 3 3 4 4 A A B B TITLE DESIGNED DRAWN CHECKED APPROVED DATE c HOG SLAT Incorporated - DATE(S) SHOWN HEREON THIS COPYRIGHT DRAWING AND THE CONFIDENTIAL INFORMATION CONTAINED THEREIN ARE THE PROPERTY OF HOG SLAT Inc. AND SHALL NOT BE UsED OR REPRODUCED IN ANY MATERIAL FORM NOR BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF HOG SLAT Inc. T.KING T.KING F.HARRIS F.HARRIS 6/13/2012 Control Unit Body M75, No Elec Box MATERIAL SCALE SEE NOTES SHEET OF 1 1 DWG. HS611 TOLERANCES UNLESS OTHERWISE SPECIFIED: .X =  .125 .XX =  .032 .XXX =  .005 ANGLES =  2 N.T.S. A1 REVISION [X] =  3 [.X] =  .8 [.XX]=  .13 WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov *ETL Certified *ETL Certified

9 GROWERSELECT Extended Anchor Bearing Eliminate problems with auger breaking and plugging when feeding out of the front bin of a tandem system. With the extended anchor bearing you can open the slide gate and remove restrictor baffles that cause bridging. The standard anchor bearing features a restrictor tube to prevent the core of the auger from overfilling. The extended anchor simply extends the restrictor tube forward to the front bin. Remove the existing anchor bearing on the back bin. Cut the 14’ galvanized tube to length extending 2” past the front unloader. Slip the cut tube inside the auger core and attach the new bearing to the rear bin unloader. Without Extended Anchor With Extended Anchor #HSAB75E-10.................................for M75 for GSI (must also order Part #HSAB75E-8) #HSAB75EC-10......for M75 Chore-Time, GrowerSELECT (must also order Part #HSAB75E-8) #HSAB75E-8..........................................14’ Galvanized Tube for Extended Anchor Bearing Item # Description Chore-Time® AP® Big Dutchman® Valco® Auger Gear Heads HSGR001 352 RPM, Mdl 55 3261-5 - - - HSGR002 352 RPM, Mdl 75/90 3261-7 - - - HSGR003 358 RPM, Poultry w/ clamp - 0040408 - - HSGR004 358 RPM - FLX-4277 - - HSGR005 216 RPM - - - - HSGR009 358/296 RPM at 60/50 Hz - 58 - - 11-00-1005A - HSGR010 693/573 RPM at 60/50 Hz 3261-17 - - - HSGR011 266/222 RPM at 60/50 Hz - 58 - - 86-00-2667 - HSGR012 266/222 RPM at 60/50 Hz - FLX-4403 - - HSGR014 441/364 RPM at 60/50 Hz - 78 - FLX-4405 - - HSGR015 256/213 RPM at 60/50 Hz - 58 - - - - HSGR016 216/179 RPM at 60/50 Hz - 58 3261-1 - - - HSGR017 156/130 PRM at 60/50 Hz - 78 - - - - HSGR021 62/52 RPM at 60/50 Hz- 78 3261-9 - - - HSGR022 657/542 RPM At 60/50 Hz 3/4” - - - 450369 Pinion Gears HSP01 Straight pinion, 1/2” ID - FLX-4275 - - HSP02 Straight pinion, 5/8” ID - FLX-4276 11-00-9364 - HSP03 Helical pinion, 1/2” ID 5046 - - - HSP04 Helical pinion, 5/8” ID 6104 - - - HSP05 Straight pinion, 1/2” ID 3249 - - - HSP06 Straight, 1.812” long, 1/2” ID - FLX-2983 11-00-9151 - HSP07 Straight, 14 tooth x 2.25” long, 5/8” ID - FLX-2973 86-00-0205 - HSP08 Straight, 14 tooth x 3” long, 5/8” ID - FLX-4542 - - HSP09 Straight 14 teeth 1/2” bore 2.170” long - - 10-00-9613 450366 Use of Original Equipment Manufacturer part numbers is for reference only. Item # Description Chore-Time® AP® Big Dutchman® Valco® #HSP03 #HSP01 Flexible Drop Tube Item # Description Chore-Time® AP® HSFLX-2563F 3” ID, galv. (25’ roll) 7497 FLX-2563 HSFLX-2564F 3-1/2” ID, galv. (25’ roll) 6383 FLX-2564 HSFLX-4240 3.406” ID x galv. (12” Long) 1 FLX-4240 #52776........................................................3” ID, 3.35 OD flexible tube, clear #52777...................................................................3-1/2 ID, flexible tube, clear Clear Flexible Drop Tube WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

10 WWW.HOGSLAT.COM Use of Original Equipment Manufacturer part numbers is for reference only. Direct Drive Auger Motors Superior engineering makes GrowerSELECT® the best replacement motor for any operation. • Features stress-proof 1144 steel shaft to prevent breakage • Permanently lubricated ball bearings provide extended service • Shielded centrifugal starting switch protects against over spin conditions • Manual overload protection • Higher Service Factor • 1725 RPM, 50/60 Hertz Replacement OEM Part Numbers* Item # AP/Cumberland® Chore-Time® Valco® HS9020A FLX-4763 4229 735390 HS9021C FLX-4764 5050C 735391 HS9022A FLX-4765 5051 736392 HS9023C FLX-4766 6857 735393 HS9024A FLX-2473 8782C - HP: 1/3 Shaft Size: 1/2” F.L. Amps: 5.4/2.7-2.7 Volts: 115/208-230 Frame: 48Y HS9020A HP: 1/2 Shaft Size: 1/2” F.L. Amps 8.7/ 4.3-4.4 Volts: 115/208-230 Frame: 56Y HS9021C HP: 3/4 Shaft Size: 1/2” F.L. Amps 10.4/5.0-5.2 Volts: 115/208-230 Frame: 56Y HS9022A HP: 1 Shaft Size: 5/8” F.L. Amps 8.8/4.4-4.4 Volts: 115/208-230 Frame: 56HY HS9023C HP: 1-1/2 Shaft Size: 5/8” F.L. Amps 15.7/7.8-7.8 Volts: 115/208-230 Frame: 56HY HS9024A WARRANTY

MOTORS 11 Use of Original Equipment Manufacturer part numbers is for reference only. US Motors • Totally Enclosed Fan Cooled • Class B Insulation • Manual Reset Thermal Overload Protector • ODE Shaft Extension for Hand Crank • Ball Bearings • Reversible Rotation • 1-Year Warranty HP: 1/3 Shaft Size: 1/2” F.L. Amps: 5.9/2.6 Volts: 115/230 Frame: 56Y N9020 HP: 1/2 Shaft Size: 1/2” F.L. Amps: 8.6/4.3 Volts: 115/230 Frame: 56Y N9021 HP: 3/4 Shaft Size: 1/2” F.L. Amps: 10.6/5.3 Volts: 115/230 Frame: 56Y N9022 HP: 1 Shaft Size: 5/8” F.L. Amps: 12.89/6.5-6.4 Volts: 115/208-230 Frame: 56Y N9023 HP: 1-1/2 Shaft Size: 5/8” F.L. Amps: 16.2/8.1 Volts: 115/230 Frame: 56Y N9024 Leeson Motors • Totally Enclosed Fan Cooled • Class B Insulation • Manual Reset Thermal Overload Protector HP: 1/2 Shaft Size: 1/2” F.L. Amps: 8.4/ /4.0-4.2 Volts: 115/208-230 Frame: 56YZ LE9021 HP: 3/4 Shaft Size: 1/2” F.L. Amps: 8.4/ 4.5-5.2 Volts: 115/208-230 Frame: 56YZ LE9022 HP: 1 Shaft Size: 5/8” F.L. Amps: 10.8/ 6.0-5.4 Volts: 115/208-230 Frame: 56YZ LE9023 HP: 1-1/2 Shaft Size: 5/8” F.L. Amps: 14.5/ 7.1-7.3 Volts: 115/208-230 Frame: 56YZ LE9024 • ODE Shaft Extension for Hand Crank • Ball Bearings • Reversible Rotation • 2 Year Warranty

12 WWW.HOGSLAT.COM Optional two-piece cone for installation on existing feed pipes. Easy to read Feed Level Indicator ensures each pan is set exactly the same and allows for adjustments as chicks grow. Optional 8 or 14 spoke grill. Reinforced wear areas in the pan add strength, leading to a longer lifespan. Standard or 1/2” longer extended fin. Extended fins keep the cone off the pan bottom maintaining feed flow. Specially designed flood windows increase available feed in the pan to attract chicks starting on feed. CLASSIC FLOOD WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov #HS8500................................................................................................... EOL End Control Pan - Broiler • Paddle switch • 20 amp micro switch • 115/230 volt • 10’ cord with 18” cord protector • 8-spoke grill only #HS8250.........................................................................Standard Mid Line Intermediate Control Pan - Broiler • Paddle switch • 20 amp micro switch • 115/230 volt • 10’ cord with 18” cord protector • 8-spoke grill only #HS8510........................................................................................Pullet EOL End Control Pan - Pullet/Shallow • Paddle switch • 20 amp micro switch • 115/230 volt • 10’ cord with 18” cord protector • Shallow raised ridge pan bottom • 8-spoke crown grill only #HS8260...................................................................................Shallow mid line Intermediate Control Pan - Shallow • Paddle switch • 20 amp micro switch • 115/230 volt • 10’ cord with 18” cord protector • Shallow raised ridge pan bottom • 8-spoke crown grill only WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

13 GROWERSELECT HS8500 End of Line Control Pan Key Qty Item# Description 1 1 HS8500-16 Bracket Complete, Bottom - Eol Control 2 1 HS8500-12 Housing Complete, Main - Eol Unit 3 1 HS8500-24 Inlet, Complete - Eol Control 3A 1 HS8500-42 Inlet, Complete (45mm smooth pipe) 4 19 60930 Shw #10-24 X .375 Zp 5 1 HS8500-7 Assy - Paddle Shield - Eol Control 6 1 HS8500-14 Paddle, Eol Control 7 1 HS8500-15 Brkt, Retainer - Eol Control Paddle 8 1 HS8500-10 Brkt Complete, Control Module - Eol Control 9 2 5289024 Screw, 6-20 X .250 Pan Head Tapping 10 1 HS8500-31 Brkt Complete, Hopper Divider - Eol Control 11 1 HS8250-4 Assy- Control Housing 12 1 HS8500-19 Brkt, Drive End - Eol Control 13 1 HS8500-34 Cover Assy, Hopper - Eol Control 14 1 HS8500-18 Rear Shield, Hopper - Eol Control 15 1 HS8000-2 Grill, 14 Spoke Chicken Feeder 16 1 HS8000-3 Cone, Adjustment Chicken Feeder 17 4 60596 Washer, Lock, Helical, 1/4 Zp 18 4 60500 Hhc, 1/4-20 X .50 Lg Zp 19 1 1121010500 Nut, Hex, Nyloc #10-32 Unf 20 2 60911 Nut, Hex, #10-32, Zinc 21 1 HS8500-37 Cone, Support Modified - Eol Control 22 3 60925 Screw, 10-16 X .75 Hex Type B 1 WNY25-1 Wire Nut, Yellow - Csa Certified HS8250 Mid-Line Control Pan Key Qty Item# Description 1 1 HS8250-6 Bracket Mounting Assembly 2 6 60930 Screw 10-24 X .375 Hex Head Washer Unslotted Zinc 3 1 HS8500-14 Paddle Control 4 1 HS8500-15 Control Paddle Bracket Retainer 5 2 5289024 Screw, 6-20 x .250 6 1 HS8250-4 Assembly, Control Housing 7 1 HS8000-2 Grill, 14 Spoke Chicken Feeder 8 1 HS8000-3 Cone Adjuster-Classic Flood Feeder 9 4 60596 Washer Lock 1/4’’ 10 4 60500 Bolt 1/4-20 X 1/2’’ Zinc 11 1 1121010500 Nut Nylok SS 10-32 12 2 60911 Nut, Hex, 10-32 Zinc 13 1 HS8250-13 Bracket Housing Assembly 14 1 HS8250-11 Bracket Shield Mount Assembly 15 1 HS8250-8 Bracket Flapper Assembly 16 1 HS8500-28 Paddle Shield 17 1 HS8500-27 Plate Retainer 18 2 609210 Screw 6-32 X 5/16” Zinc 19 2 60912 Nut Hex Machine Screw #6-32 Zinc 20 1 HS8250-10 Cover, Mount 21 2 10C175MUHZ Hex Head Unslotted 10-24 X 1-3/4” Zinc 22 4 10CNMAZ Nut 10-24 Hex Zinc 23 1 HS8500-37 Cone Support EOL Control 24 3 60925 Screw 10-16 x .75 Hex Head Zinc 14 Spoke Grill: #HS8000-2 8 Spoke Grill: #HS8000-8

14 WWW.HOGSLAT.COM FEEDER PARTS MATRIX HS8000 HS8000C HS8000A HS8000B HS8000G HS8000D HS8000F WHEN YOU BUY 500 OR MORE! SAVE CLASSIC FLOOD HS8000-7 Pan w/ shallow cone HS8000-1 Pan w/ standard cone HS8000-4 Support cone for standard fin HS8000-4F Support cone for extended fin HS8000O HS8000I HS8000M

15 GROWERSELECT HS8000-30 2-piece support cone bottom HS8000-31 2-piece support cone top HS8000-3F Adjuster for extended fin HS8000-3 Adjuster for standard fin HS8000-8 8-spoke grill HS8000-2 14-spoke grill HS8000-10 2-piece support cone bottom - 45mm pipe HS8000-9 2-piece support cone top - 45mm pipe *See Key 3A on Page 13 for smooth pipe control unit

16 WWW.HOGSLAT.COM With heavy plastic construction to handle aggressive pullets, the Classic Flood feeder can be customized for any operation. • Shallow pan for increased accessibly with raised ridges separating the bottom to maintain uniform feed distribution. • Flood window for increased feed availability for young chicks. • Choose from optional features such as slide shutoff, restriction cone, and an anti-rotation device. #HS8000-24......................Flood Lockout Collar Optional Part # HS8000-24, Flood Lockout Collar also available for all models HS8010A HS8010B HS8010C HS8010D Pan HS8000-16 Shutoff Slide HS8000-17 Restrictor HS8000-18 Cone Bottom HS8000-19* Cone Top HS8000-20 Adjuster HS-8000-21 Anti-Rotation HS8000-22 8-Spoke Crown Grill HS8000-14 HS8000-19A HS8000-19B HS8000-19C HS8000-19D FEEDER PARTS MATRIX

17 GROWERSELECT Choose from multiple options to customize your operation’s rooster pans. Heavy-duty injected molded plastic stands up to the most aggressive roosters. • 4-spoke grill minimizes “hang-ups”. • Anti-Rotation Device to prevent swinging and keep pans steady. • Raised ridge pan bottom maintains uniform feed distribution. • Molded locking collar to prevent manipulation of feed level. • Optional Restrictor Tube to further reduce amount of feed per pan. • Optional pan shut off slide to allow selective feeding. HS8020B HS8020C HS8020D Pan HS8000-16 Shutoff Slide HS8000-17 Restrictor HS8000-18 Cone Bottom HS8000-19* Cone Top HS8000-20 Adjuster HS-8000-21 Anti-Rotation HS8000-22 Flood Lockout Collar HS8000-24 HS8000-19B HS8000-19C HS8000-19D FEEDER PARTS MATRIX 4-Spoke Grill HS8000-25

18 WWW.HOGSLAT.COM Poultry Feed Systems 2 3 5 4 6 7 8 9 10 11 12 1 For winches, pulleys, cable and rod winching components go to page 221 #HS597.....................................................................Hopper Level Control Switch #HS597-PROX...Hopper Level Prox Control Switch (requires HS765 Isolator Switch) #HS765.....................................................................Multi-Hopper Isolator Switch 2) Hopper Level Control Switches A) Electromechanical switch with adjustable arm to set feed levels. B) Proximity Hopper Switch eliminates problems with paddles and fabric diaphragms. C) Isolator switch serves as a master relay connecting up to four proxy or electromechanical hopper switches to the auger control unit. #HS569A-120..............................................................................................120 lb #HS569A-200............................................................................................200 lb #HS456.............................................................................Lid for 200 lb hopper #HS569A-300............................................................................................300 lb #HS829-150........................................................................Poly Hopper, 150 lb 1) Feed Line Hoppers 20 ga. galvanized feed hopper with Dual Point suspension. Can also be mounted with top single point suspension. Ships unassembled. #HS532KIT.........................................................................Single Unloader Kit #HS533KIT........................................................................Double Unloader Kit 3) Unloader Kits Unloader kits for feed line hoppers, complete with cannonballs, anchor bearings, and hardware. #HSPFT175-409...............................................................................1.75 4 On 9 #HSPFT175-410...............................................................................1.75 4 On 10 #HSPFT175-809...............................................................................1.75 8 On 9 #HSPFT175-810...............................................................................1.75 8 On 10 4) Feed Line Tube Constructed of G90, rolled-formed galvanized steel, the GrowerSELECT® feedline tube is a standard 1.75” diameter. The seam features additional crimps per inch for additional strength and a deep 2” long wedged bell mouth. #HSH022......................................Hanger Bracket #HSH022-1......................Strap only for HSH022 #HSH023......................................Hanger Bracket #HS671...........................Rooster Hanger Bracket #HS449.......................Scissor Hanger w/ S-hook 6) Feed Line Hanger #HSH022 #HSH023 #HSFA-44..........................Flexible Auger 44mm 7) Grow-Flex™ Auger Our innovative manufacturing process forges a stronger, more durable auger with superior flexing and breaking strength that outperforms standard augers. #HSH024....................................................... Clamp 9) Clamp for 1.75” Feed Pipe See page 48 #HS671 See page 12 for feed pan options A) #HS597 B) #HS597-PROX C) #HS765 WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov #HS449 See page 12 See page 12 WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Molded polypropylene hopper with easy on/off attachment

19 GROWERSELECT #HS8500...............................End Control Pan 11) End Control Pan Rugged, trouble-free design utilizes a simple paddle switch to control feed lines. Complete with 10’ pigtail cord, 18” cord protector, water tight connections and 8 spoke grill. 115/230 Volts with 20 amp micro switch. CSA Certified. Available as eight spoke grill only. #HS9020D1-P........................................1/3 Hp #HS9021D1-P..........................................1/2 Hp 12) Drive Units Complete with 115/230v motor, 352-rpm gear head, pinion, driver connection kit, gear oil and hardware. Includes 36” pigtail cord. #HS9020A.......1/3 Hp Standard (CT,BD, GSI, Valco) #HS9021C....... 1/2 Hp Standard (CT,BD, GSI, Valco) #HS9025A................1/2 Hp Roxell Applications Direct Drive Auger Motors These rugged, reliable motors have been designed from the “ground up” to meet the demanding duty cycle of feed motors. #HSGR001............................352 RPM Gear Head Auger Gear Head Quality cast aluminum housing with precision cut internal gears. #52260-500............................................500’ roll #52260-1000.........................................1000’ roll #HS17016.......................Shocker Spring, 5” long Shocker Cable 1/16” 1x7 galvanized cable #HS532-15.........................................Insulator Kit Insulator Kit #HS538........................Auger Lock and Drive Kit Auger Lock & Drive Kit #HSH076............................................................................................3” - no lock #617315...............................................................................................2” - no lock #HSH018......................................................................................3-1/2” - w/ lock #HSH019........................................................................................................... flat #HSCA-1............................................................................Plastic Cord Adjuster #HSCA-3..................................................................Heavy Duty Cord Adjuster Cable & Rope Adjusters 1/8” Cord Small raised hole down 3/16” Cord Large hole down 1. 2. 3. 3/16” Cord Large hole down 1. 2. 3. #617315 #HSCA-1 #HS8500LA.............................................Light Kit Light Kit Light kit for any Classic Flood end control pan. Six powerful, long-lasting LED lights illuminate the control pan attracting birds. This leads to increased feed line run times, resulting in fuller pans. The light kit mounts under the control unit to reduce shading and shadows. Includes light plate and integrated wiring assembly. #HSCA-3 #ISCC-10............................................Cord Cleaner Cord Cleaner The Cord Cleaner installs over existing pulleys to remove dirt and dust when the equipment is raised. WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including formaldehyde, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov #HSH019 #HSH018 #HSH076

20 WWW.HOGSLAT.COM Turkey Poult Feeder #HST1200...........................................................................Poult Turkey Feeder PARTS LIST DESCRIPTION PART NUMBER QTY ITEM TOP, SUPPORT CONE TURKEY POULT FEEDER HS8000-27 1 1 GRILLE, 4 SPOKE CHICKEN FEEDER HS8000-25 1 2 FEED LEVEL RING, TURKEY POULT FEEDER HS8000-28 1 3 BOTTOM, CONE SUPPORT TURKEY POULT FEEDER HS8000-26 1 4 PAN, CHICKEN FEEDER SHORT HS8000-7 1 5 1 1 2 2 3 3 4 4 A A B B TITLE DESIGNED DRAWN DATE c HOG SLAT Incorporated - DATE(S) SHOWN HEREON THIS COPYRIGHT DRAWING AND THE CONFIDENTIAL INFORMATION CONTAINED THEREIN ARE THE PROPERTY OF HOG SLAT Inc. AND SHALL NOT BE USED OR REPRODUCED IN ANY MATERIAL FORM NOR BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF HOG SLAT Inc. A.MITCHELL A.MITCHELL 7/18/2023 TURKEY POULT FEEDER INTERNAL MANUF NUMBER SHEET OF 1 1 DWG. HST1200 TOLERANCES UNLESS OTHERWISE SPECIFIED: LAS TOLERANCIAS A MENOS QUE SE INDIQUE LO CONTRARIO: .X =  .125 .XX =  .032 .XXX =  .005 ANGLES =  2 IR REVISION [X] =  3 [.X] =  .8 [.XX]=  .13 MATERIAL SEE NOTES SCALE N.T.S. DIMENSIONS IN OVALS ARE CRITICAL TO QUALITY (CTQ) DIMENSIONS IN PARENTHESES ARE FOR REFERENCE ONLY 2 1 3 4 5 REVISION HISTORY REV DESCRIPTION DATE APPROVED IR INITIAL RELEASE 7/18/2023 A.MITCHELL Key Qty Item# Description 1 1 HS8000-27 Top, support cone turkey poult feeder 2 1 HS8000-25 Grille, 4 spoke chicken feeder 3 1 HS8000-28 Feed level ring, turkey poult feeder 4 1 HS8000-26 Bottom, cone support turkey poult feeder 5 1 HS8000-7 Pan, chicken feeder short HST1250 Mechanical End of Line Control Pan - Turkey Poult Feeder Key Qty Item# Description 1 1 HS8500-16 BRACKET COMPLETE, BOTTOM - EOL CONTROL 2 1 HS8500-12 HOUSING COMPLETE, MAIN - EOL UNIT 3 1 HS8500-24 INLET, COMPLETE - EOL CONTROL 1-3/4 4 Z 19 60930 SHW #10-24 X .375 ZP 5 1 HS8500-46 ASSY- PADDLE SHIELD - EOL CONTROL 6 1 HS8500-45 PADDLE, EOL CONTROL 7 1 HS8500-15 BRKT, RETAINER - EOL CONTROL PADDLE 8 1 HS8500-10 BRKT COMPLETE, CONTROL MODULE -EOL CONTROL 9 2 60914 SCREW PHILLIPS PAN HEAD TAPPING #6-32 X .25” ZINC 10 1 HS8500-31 BRKT COMPLETE, HOPPER DIVIDER - EOL CONTROL 11 1 HS8250-4 ASSY-HOPPER LEVEL CONTROL 12 1 HS8500-19 BRKT, DRIVE END - EOL CONTROL 13 1 HS8500-34 COVER ASY, HOPPER - EOL CONTROL 14 1 HS8500-18 REAR SHIELD, HOPPER - EOL CONTROL 15 4 60596 WASHER, LOCK, HELICAL, 1/4 ZP 16 4 60500 HHC, 1/4-20 X .50 LG ZP 17 1 1121010500 NUT,HEX,NYLOC #10-32UNF 18 2 60911 NUT, HEX, #10-32, ZINC 19 3 60925 SCREW, 10-16 X .75 HEX TYPE B 20 1 HS529-58 SPRING, ADJUSTMENT 21 2 HST504 STOP CABLE ASSEMBLY 1/16 X 18 SS 22 1 HSH032 NUT, CURTAIN THUMB NUT 1/8” RED 23 1 HS8000-25 GRILLE, 4 SPOKE CHICKEN FEEDER 24 1 HS8000-28 FEED LEVEL RING, TURKEY POULT FEEDER 25 1 HS8000-26CP CONE BOTTOM CONTROL PAN TURKEY POULT 26 1 HS8000-7 PAN, CHICKEN FEEDER SHORT Four-spoke grill allow poults increased access to feed. Feed ring adjusts automatically as the pan is lifted simplifying management and limiting waste. Two-piece, removable top assist with installation and replacement Rugged, heavyweight polypropylene pan with reinforced wear areas and hanging hook for cleaning PARTS LIST DESCRIPTION PART NUMBER Y BRACKET COMPLETE, BOTTOM - EOL CONTROL HS8500-16 HOUSING COMPLETE, MAIN - EOL UNIT HS8500-12 INLET, COMPLETE - EOL CONTROL 1-3/4 HS8500-24 SHW #10-24 X .375 ZP 60930 ASSY- PADDLE SHIELD - EOL CONTROL HS8500-46 PADDLE, EOL CONTROL HS8500-45 BRKT, RETAINER - EOL CONTROL PADDLE HS8500-15 BRKT COMPLETE, CONTROL MODULE -EOL CONTROL HS8500-10 SCREW PHILLIPS PAN HEAD TAPPING #6-32 X .25" ZINC 60914 BRKT COMPLETE, HOPPER DIVIDER - EOL CONTROL HS8500-31 ASSY-HOPPER LEVEL CONTROL HS8250-4 BRKT, DRIVE END - EOL CONTROL HS8500-19 COVER ASY, HOPPER - EOL CONTROL HS8500-34 REAR SHIELD, HOPPER - EOL CONTROL HS8500-18 WASHER, LOCK, HELICAL, 1/4 ZP 60596 HHC, 1/4-20 X .50 LG ZP 60500 NUT,HEX,NYLOC #10-32UNF 1121010500 NUT, HEX, #10-32, ZINC 60911 SCREW, 10-16 X .75 HEX TYPE B 60925 SPRING, ADJUSTMENT HS529-58 STOP CABLE ASSEMBLY 1/16 X 18 SS HST504 NUT, CURTAIN THUMB NUT 1/8" RED HSH032 1 2 3 4 A B C D TITLE c HOG SLAT Incorporated - DATE(S) SHOWN HEREON THIS COPYRIGHT DRAWING AND THE CONFIDENTIAL INFORMATION CONTAINED THEREIN ARE THE PROPERTY OF HOG SLAT Inc. AND SHALL NOT BE USED OR REPRODUCED IN ANY MATERIAL FORM NOR BE DISCLOSED TO THIRD PARTIES WITHOUT THE PRIOR WRITTEN CONSENT OF HOG SLAT Inc. ASSY-UPPER, CONTROL UNIT TOLERANCES UNLESS OTHERWISE SPECIFIED: LAS TOLERANCIAS A MENOS QUE SE INDIQUE LO CONTRARIO: .X =  .125 .XX =  .032 .XXX =  .005 ANGLES =  2 [X] =  3 [.X] =  .8 [.XX]=  .13 MATERIAL SCALE DIMENSIONS IN OVALS ARE CRITICAL TO QUALITY (CTQ) DIMENSIONS IN PARENTHESES ARE FOR REFERENCE ONLY 23 24 25 26 1 10 14 16 15 12 13 11 17 18 8 4 6 9 7 19 2 5 3 4 21 22 20

21 GROWERSELECT Removable, two-piece top aids installation and replacement. Heavy-duty galvanized shield designed to withstand large birds. Square, freeswinging, steel drop tube allows feeder to move to reduce bruising. Flue ring adjustment permits accurate control of feed level to prevent waste. Molded cone in pan distributes feed for 360° bird access. Robust polypropylene feed pan features classic deep V design with feed saver lip. Reinforced pan stands up to even the most aggressive birds. Adult Turkey Feeder #HST1000.........................................................................................................................Adult Turkey Feeder #HST1000S.........................................................................Adult Turkey Feeders, Low Profile, 2” shorter #HST1000P..............................................................................................Adult Turkey Feeder, Plastic Cone #HST1000SP......................................................................Adult Turkey Feeder, Plastic Cone, 2” shorter Adult Turkey Feeders HST1000 - Standard Profile HST1000S - Low Profile Key Qty Item# Description 1 1 HST1000-1 Pan 2 1 HST1000-10 Adjustment Flue Support 3 3 HST1000-8 Feeder Shield Support Leg 3A 3 HST1000S-8 Feeder Shield Support Leg, Low Profile 4 1 HST1000-14 Swinging Support Leg 4A 1 HST1000S-14 Swinging Support Leg, Low Profile 5 1 HST1000-7 Feed Tube 5A 1 HST1000S-7 Feed Tube, Low Profile 6 1 HST1000-4 Drop Tube Top 7 1 HST1000-13 Shield 8 2 HST1000-9 Locking Bar 9 1 HST1000-16 Flue ring adjustment 10 4 13664-00200 Screw #10-24 x 3/8” Hex Slot Washer Zinc w/ Nylon Patch 11 4 6070900 Carriage Bolt 1/4-20 X 5/8” Zinc 12 4 60680 Lock Nut Hex Nylon Insert 1/4-20 Zn 13 1 HST1000-15 Centering Clip 6 10 8 5 11 7 12 9 2 3 4 1 13 WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Now available with plastic drop tube and adjustment.

22 WWW.HOGSLAT.COM HST1100 Mechanical End of Line Control Pan - Turkey Key Qty Item# Description 1 1 HST1100-2 Tube, Assy, Drop-Mechanical 2 1 HST1100-3 EOL Shield, Turkey Feeder-Mechanical 3 1 HST1000-10 Support, Adjustment Flue 4 1 HST1000-1 Pan, Turkey Feeder 5 1 HST1000-16 Ring, Adjustment, Flue 6 3 HST1000-8 Leg, Support, Feeder Shield 7 1 HST1000-14 Leg, Support, Swinging 8 1 88023NMF Conduit Flexible 1/2’’ X 100’ Rolls Sold Per Foot 9 1 8802093 Elbow, Metallic, 1/2 Liquid Tight 10 1 8802092 Hub,Conduit,Liquid Tight, 1/2 Gray St 11 1 HST1100-5 Housing Complete, Main EOL Unit Mechanical 12 1 HST1100-10 Inlet, Complete-Mechanical EOL Control 2” 13 1 HS8500-7 Assy- Paddle Shield - EOL Control 14 1 HST1100-15 Paddle, EOL Control 15 1 HS8500-15 Brkt, Retainer - EOL Control Paddle 16 1 HS8500-10 Brkt Complete, Control Module - EOL Control 17 1 HS8500-31 Brkt Complete, Hopper Divider - EOL Control 18 1 HS8250-4 Assy-Hopper Level Control 19 1 HS8500-19 Brkt, Drive End - Eol Control 20 1 HST1100-12 Cover Asy, Hopper EOL Control Mechanical 21 1 HST1100-9 Rear Shield, Hopper EOL Control Mechanical 22 1 HST1100-7 Brkt Complete, Bottom-EOL Control-Mechanical n Grove, NC USA September 2019 REV A5 3 HST1500 G-Logic End of Line Control Pan - Turkey PARTS LIST NUMBER DESCRIPTION T1500-24 INLET, COMPLETE, EOL CONTROL, 2 IN T1500-12 EOL CONTROL UNIT, BODY T1500-38 U-BRACKET, CONTROL UNIT - TURKEY T1500-34 COVER, HOPPER, EOL UNIT, COMPLETE T1500-44 COVER ASY, HOPPER - EOL CONTROL - TURKEY T1500-7 EOL CONTROL UNIT, BRKT, DRIVE END - TURKEY T1500-5 BRACKET, CONTROL BOX, EOL CONTROL UNIT, TURKEY - COMPLETE T1500-8 CONTROL BOX ASSY, G-LOGIC,TURKEY T1500-18 REAR SHIELD, HOPPER - EOL CONTROL - TURKEY T1000-8 LEG, SUPPORT, FEEDER, SHIELD T1500-1 EOL SHIELD, TURKEY FEEDER T1000-14 LEG, SUPPORT, SWINGING T1500-9 SUPPORT, SENSOR, EOL UNIT, TURKEY T1500-46 TUBE, ASSY, DROP 7091707 RING, ADJUSTMENT, FLUE T1000-10 SUPPORT, ADJUSTMENT FLUE T1000-1 PAN, TURKEY FEEDER HS11 SENSOR -8 SUBASSEMBLY EL1251 Sensor Part of HST1500-8 Subassembly HST1500 G-Logic End of Line Control Pan - Turkey Key Qty Item# Description 1 1 HST1500-24 Inlet, Complete, EOL Control, 2 In 2 1 HST1500-12 EOL Control Unit, Body 3 1 HST1500-38 U-Bracket, Control Unit 4 1 HST1500-34 Cover, Hopper, EOL Unit, Complete 5 1 HST1500-44 Cover Asy, Hopper - EOL Control 6 1 HS8500-19 Eol Control Unit, Brkt, Drive End 7 1 HST1500-5 Bracket, Control Box, EOL Control Unit - Complete 8 1 HST1500-8 Control Box Assy, G-Logic 9 1 HST1500-18 Rear Shield, Hopper - EOL Control 10 3 HST1000-8 Leg, Support, Feeder, Shield 11 1 HST1500-1 Eol Shield, Turkey Feeder 12 1 HST1000-14 Leg, Support, Swinging 13 1 HST1500-9 Support, Sensor, EOL Unit 14 1 HST1500-46 Tube, Assy, Drop 15 1 HST1000-16 Ring, Adjustment, Flue 16 1 HST1000-10 Support, Adjustment Flue 17 1 HST1000-1 Pan, Turkey Feeder tem HST1100 Mechanical End of Line Control Pan - Turkey #HST1500-50..............................................................................3 to 30 minute Time Delay Assy

Made with FlippingBook

RkJQdWJsaXNoZXIy MTA3MzU=