138 WWW.HOGSLAT.COM Cooling System Control Cooling System Control provides an economical solution for controlling spraying or dripper systems. Assembled from common plumbing fittings and timer/thermostats on a PVC panel, field repairs can be accomplished without ordering special parts. • Check Valve • Pressure Regulator • 110V Solenoid Valve • Filter • Single-Stage Thermostat #HS729.......................................................................................................................Cooling System Control #HS728..........................................................................................................................w/ 24 hour time clock • Adjustable Timer with independent on/off knobs, 30 minutes with 1/2 minute increments. • Power Cord • Also available with 24 hour time clock Comes pre-wired in NEMA enclosures: 1) #60281...........................................................................................................................................Hose Drain 2) #23204491110B.........................................................................................1 gph drip nozzles, bag of 20 3) #UCS05.........................................................................................................Mist Emitter, 5 GPH at 15 psi 4) #1610-0841.......................................................................................................................................1/2” Tee 5) #60280..........................................................................................................1/8” Drip Tube, 100’ roll, 1 lb 6) #60266........................................................................................Barb Adapter Drip System, 1/2” x 1/2” 7) #60277........................................................................................................................................Hole Punch 8) #60268.........................................................................................................Loop Clamp, 30 per package 9) #60278..............................................................................................5/32” Goof Plug, Strip of 10 shown 10) #2320-3145-050............................................................Nozzle Spray Tee, Assembly w/ .5 GPM Tip 11) #60275..................................................................................................................................1/2” Blue Tube 12) #1610-4496.........................................................................5/32” Barbed Connector, 20 per package 1. #ECS500...........................Controller, 1” solenoid #UCS152-24V.............................24 V, 1” solenoid 3/4” SLIP & COMP fittings #EC102-NA..............Cord w/12 V condor transformer Designed to control the flow of water based on the time and temperature setting you choose. The Econo-Cool controller will automatically activate the solenoid valve and allow water to flow to the emitters when the air temperature is warmer than the temperature setting of the thermostat. Visions Econo-Cool (Formerly Meter-Man) The C-110S Controller is used to regulate the showering and interval cycles in a livestock cooling system. It has output to control one 24VAC electric valve. This easy-to-program controller can be set to operate either in Two-Stage Mode or Smart Mode. Two-Stage Mode provides traditional two-level cooling - a lower intensity cooling cycle operates when the temperature is above the low threshold. A higher intensity cooling cycle operates when the temperature is above the high threshold. Smart Mode provides innovative, infinite-stage cooling. Interval time is automatically adjusted as the temperature changes. The interval time is the period of time when no showering occurs and the water is allowed to evaporate from the animals. As temperature increases, the interval time will decrease, thus giving animals more frequent shower cycles, to reduce heat stress. This provides exactly the right amount of cooling at any temperature while minimizing water usage. C-110S Edstrom Control #60282...........................C-110S Edstrom Control • 24 vac • GHT fittings • Filter • 1.7 lbs. Spray-Cool Electric Valve Filter Kit #60299 • 24 vac • GHT fittings • Filter • Reducer Drip Cool Electric Valve Filter Kit #60293 Filter/Pressure Reducer 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
RkJQdWJsaXNoZXIy MTA3MzU=