279 METAL COATINGS VANTEK METAL REPAIR & PROTECTION PRODUCTS Don’t wait until replacement is needed! Save time and money by repairing and protecting now! CEILINGS Before ROOFS BINS Before Before 4 STEPS Successful repair and protection is a result of attention to proper preparation techniques and the use of quality products designed to achieve long-lasting performance. TO SUCCESSFUL METAL COATINGS Step 1: Remove Loose Rust Remove loose rust by pressure washing, scraper or brush. Step 2: Convert Rust Although abrasive blasting and mechanical rust removal are great methods, they are not always feasible. Experience shows that the treatment of rust is best achieved by RUST STOPPER. Step 3: Patch Holes, splits, seams and joints are covered with VANTEK SEAM TAPE, designed specifically for all weather conditions and are compatible with ALUMA-KOTE. Step 4: Corrosion Resistance Coating Apply the ALUMA-KOTE to protect metal from corrosive compounds and weather. #VTK5006.....................................................................................1 qt. (12/case) #VTK5004.....................................................................................1 gal. (4/case) #VTK5007........................................................................5 gal. Pail (36/pallet) ALUMA-KOTE ALUMA-KOTE is a moisture cured urethane coating designed to protect aging galvanized metal. It has excellent UV light, moisture and abrasion resistance. With ‘leafing technology’ it has excellent adhesion to sound, properly prepared steel, and surfaces. ALUMA-KOTE withstands high heat, up to 400°F / 204°C and is has rapid cure of 1-3 hours typically. Aluminum metallic sheen. Coverage is 200-300 sq. ft. per gallon. #VTK5003.......................................................................................20 oz. spray #VTK5002......................................................................................1 qt. (6/case) #VTK5001.....................................................................................1 gal. (4/case) Rust Stopper RUST STOPPER chemically converts rust into a black organic compound. A clear acrylic coating is formed. It will last years without painting, or it can be painted over with ALUMA-KOTE, latex or oil-based paints. Extends the life of anything made of metal. Coverage is 400-500 sq. ft. per gallon. #VTK5008.......................................................1 roll Seam Tape SEAM TAPE adds additional protection and strength to cracks, holes, and seams. Coatable. Self-adhesive peel and stick 2” wide x 50’ roll. #VTK5005........................................................1 qt. Metal Repair Kit Metal Repair Kit for small repairs. Covers about 50 sq. ft. Kit contains 1 qt. Aluma-Kote, 1 pint Rust Stopper, 12” Seam Tape and Brush After After After Apply Rust Stopper Rust Converted VANTEK Concrete Restoration and Protection
RkJQdWJsaXNoZXIy MTA3MzU=