16 WWW.HOGSLAT.COM Extended Anchor Bearing Eliminate problems with auger breaking and plugging when feeding out of the front bin of a tandem system. With the extended anchor bearing you can open the slide gate and remove restrictor baffles that cause bridging. The standard anchor bearing features a restrictor tube to prevent the core of the auger from overfilling. The extended anchor simply extends the restrictor tube forward to the front bin. Remove the existing anchor bearing on the back bin. Cut the 14’ galvanized tube to length extending 2” past the front unloader. Slip the cut tube inside the auger core and attach the new bearing to the rear bin unloader. Without Extended Anchor With Extended Anchor #HSAB75E-10.................................for M75 for GSI (must also order Part #HSAB75E-8) #HSAB75EC-10......for M75 Chore-Time, GrowerSELECT (must also order Part #HSAB75E-8) #HSAB75E-8..........................................14’ Galvanized Tube for Extended Anchor Bearing Gearhead Shaft Size Motor Hz Motor RPM Output RPM Replacement Replacement Required Pinion(s) Auger Gear Heads HSGR001 5/8 60 1725 352 3261-5 N/A HSP03/HSP04 Helical HSGR002 7/8 60 1725 352 3261-7 N/A HSP03/HSP04 Helical HSGR003 13/16 60 1725 358 N/A 00404048 HSP01/HSP02 Straight HSGR004 7/8 60 1725 358 N/A FLX-4277 HSP01/HSP02 Straight HSGR005 7/8 60 1725 216 N/A N/A HSP05 Straight HSGR006 7/8 50 1425 364 N/A N/A HSP03/HSP04 Helical HSGR007 5/8 50 1425 364 N/A N/A HSP03/HSP04 Helical HSGR008 7/8 60 1725 256 N/A N/A HSP03/HSP04 Helical HSGR009 5/8 60 1725 358 Big Dutchman 11-00-1005A HSP01/HSP02 Straight HSGR010 5/8 60 1725 693 3261-17 N/A HSP03/HSP04 Helical HSGR011 5/8 60 1725 266 Big Dutchman 86-00-2667 HSP01/HSP02 Straight HSGR012 7/8 60 1725 266 N/A FLX-4403 HSP01/HSP02 Straight HSGR014 7/8 50 1725 364 N/A FLX-4405 HSP01/HSP02 Straight HSGR015 5/8 60 1725 256 N/A N/A HSP03/HSP04 Helical HSGR016 5/8 60 1725 216 3261-1 N/A HSP05 Straight HSGR017 7/8 60 1725 156 N/A N/A HSP03/HSP04 Helical HSGR019 5/8 60 1725 352 N/A HSP03/HSP04 Helical HSGR021 7/8 60 1725 62 3261-9,-21 N/A HSP05 Straight HSGR022 3/4 60 1725 657 Valco: 450369 Straight HSGR024 7/8 60 1725 62 Helical Pinion Gears HSP01 1/2” 1.062” 2.5” 14 Straight Closed FLX-4275 HSP02 5/8” 1.062” 2.5” 14 Straight Closed FLX-4276 11-00-9364 HSP03 1/2” 1.062” 1.75” 21 Helical O-Ring 5046 HSP04 5/8” 1.62” 1.75” 21 Helical O-Ring 6104 HSP05 1/2” 0.875” 1.75” 18 Straight O-Ring 3249 HSP06 1/2” 1” 1-13/16” 12 Straight O-Ring FLX-2983 11-00-9151 HSP07 5/8” 1.062” 2.25” 14 Straight Closed FLX-2973 86-00-0205 HSP08 5/8” 1.062” 3” 14 Straight Closed FLX-4542 HSP09 1/2” 1.062” 2.17” 14 Straight O-Ring 10-00-9613 450366 Use of Original Equipment Manufacturer part numbers is for reference only. Item # Diameter (Bore) Diameter Length Teeth Configuration Type Chore-Time® AP® Big Dutchman® Valco® Helical Straight Flexible Drop Tube Item # Description Chore-Time® AP® HSFLX-2563F 3” ID, galv. (25’ roll) 7497 FLX-2563 HSFLX-2564F 3-1/2” ID, galv. (25’ roll) 6383 FLX-2564 HSFLX-4240 3.406” ID x galv. (12” Long) 1 FLX-4240 #52776........................................................3” ID, 3.35 OD flexible tube, clear #52777.................................................................3-1/2” ID, flexible tube, clear Clear Flexible Drop Tube FLEXIBLE AUGER SYSTEMS Output CTB GSI Inside Outside Number of Tooth Seal
RkJQdWJsaXNoZXIy MTA3MzU=