218 WWW.HOGSLAT.COM #H2P-115S..............................................................1/2 Hp submersible pump, 115 V #H2P-230S.........................................................1/2 Hp submersible pump, 230 V Submersible Cool Cell Pump Pumps typically used for cool cell systems are adapted from other industries; waste water, sump pumps, etc. They are designed with a higher head pressure and low volume to lift water as high as 35’. We went to one of America’s leading pump manufacturers with a request to build a pump specifically designed for cool cell systems. This pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME. This combination allows our pump to service a longer cool cell run. #H2P-120JA........................................................................3/4 Hp Jet Pump, 120 V #H2P-240J.........................................................................3/4 Hp Jet Pump, 240 V • Available as 115 or 230 volt models • Includes 9 foot power cord • 1-1/2” discharge pipe • Open drip proof motor Features Include: The Compact Jet Pump delivers outstanding performance. Efficient design minimizes friction and turbulence reducing power consumption. Self-priming pump design protects internal components from wear. Strainer basket features a Transparent Lid for easy inspection. Larger capacity extends time between clean out. Easy access drain plug for service and winterizing. Jet Pump • Oil-filled motor • Epoxy coated, cast iron housing • 2” discharge with 1-1/2” bushing to adapt to most systems • 2” bottom suction inlet Rugged Features for a Long Lasting Pump: The special impeller allows the use of a 1/2 Hp motor instead of a 3/4 Hp motor. Electrical usage is decreased by up to 25%. Get 3/4 Hp Performance from a 1/2 Hp Pump! • 9’ waterproof power cord • Silicon carbide seal • 115 / 230 Volt- 5.5/2/7 amps • 15.87” high x 9.5” wide Jet Pump Motor US Motors® 3/4 HP replacement motor for Hog Slat and Hired Hand Mega Cool non-submersible jet pumps. Motor is encased in drip-proof enclosure. 48Y frame. 1 year warranty. #HS9029 208-230 4.1/3.7 1062-5032 #HS9079 115/110 7.2/10.3 #RR9029 115/230 5.0/ 10 Part# Voltage Amps Hired-Hand Wet End Pump Hi Flo 3/4 HP wet end pump for evaporative jet pump #H2P-001..................................Wet End for Jet Pump Leaf Trap 6” diameter leaf trap for Jet Pump. • 1-1/2” inlet • 2” outlet #H2P-002...........................................Complete assy #805-0436...................................................6” O-ring #319-4100.............................................Clear Lid only PVC Union PVC pump union fitting with o-ring and gasket. Slip. #H2P-003............................................1-1/2” - Jet Pump #H2P-004................................2” - Submersible Pump #HS9029 #HS9079 Universal Jet Pump Motor Cover #B8200C................................Plastic weather cover Provides protection for jet pumps motors from rain and direct sunlight to increase useful life. Slide together heavy-duty plastic construction assembles quickly without hardware and fits most brands of jet pumps. Dimensions (LxWxH): 1.5” x 8.5” x 13.5” Basket Trap #319-3230B.......................................Assy w/ handle COOL CELL
RkJQdWJsaXNoZXIy MTA3MzU=