56 WWW.HOGSLAT.COM CHAIN FEEDING Multiflow Drive Unit HS643A Drive Unit MF Drag Auger, with gearhead - HS643-14 Drive Unit MF Drag Auger, no gearhead - 1) HS643-3 Wear Shoe-MF Drive 8210 2) HS643-12 Weldment, Base Drive Unit 8207 3) HS643-13 Weldment, Cover, Front Unit-MF Drive 8208 4) HS643-9 Hub, Drive Gear-MF Drive 8213 5) HS643-5 Sprocket, Drive 8463 6) HS643-8 Brace, Auger-MF Drive 24674 7) 23253 Screw, Socket Hd Cap 5/16” 18 thread x 3/4” 6850-1 8) HS643-10 Pin, Dowel-MF Drive 8699 When installing GrowerSELECT Multiflo Drive Unit, must install 4 drive units per feed line. Use of Original Equipment Manufacturer part numbers is for reference only. HS643-3 Wear Shoe - Multiflo Drive Wear Shoe HS643-10 Pin, Dowel - Multiflo Drive Pin HS643-9 for Multiflo Drag Auger Hub HS643-5 for Multiflo Drag Auger Drive Sprocket 9) HSGR021 Gear Head 62/52 RPM at 60/50 Hz-78 3261-9 10) HS643-2 Connector, Base-MF Drive 9636 11) 60500 Bolt Hex Cap 1/4-20 x 1/2 Zn 1487 12) 60680 Nut, Lock Hex Nylon Insert 1/4-20 Zn 1269 13) 80518 Screw Self Drilling #10-16 x 5/8” Zinc 3037 14) 616512 Screw, Slotted Hex Machine 10-24 x 5/8” Zinc 4416-3 15) 1137014 Nut, Hex Nyloc 10-24 Zinc 1560 16) 60597 Washer, Lock 5/16” Zinc 547 17) 60508 Bolt Hex Cap 5/16” -18 x 3/4” Gr. 5 Zinc 2046 18) HS643-4 Weldment, Connector End 8211 DESCRIPTION PART NUMBER QTY ITEM WEAR SHOE-MF DRIVE 1 HS643-3 1 Weldment, Base, Drive Unit 1 HS643-12 2 WELDMENT, COVER, FRONT UNIT- 1 HS643-13 3 HUB, DRIVE GEAR-MF DRIVE 1 HS643-9 4 SPROCKET, DRIVE 1 HS643-5 5 BRACE, AUGER-MF DRIVE 1 HS643-8 6 Screw, Socket Hd Cap 5/16" 18 thre 2 23253 7 PIN, DOWEL-MF DRIVE 1 HS643-10 8 Gear Head 64/53 RPM At 60/50 Hz- 1 HSGR-018 9 CONNECTOR, BASE-MF DRIVE 1 HS643-2 10 Bolt Hex Cap 1/4-20 X 1/2 Zn 8 60500 11 Nut, Lock Hex Nylon Insert 1/4-20 Z 4 60680 12 Screw Self Drilling #10-16 x 5/8'' Zi 6 80518 13 Scew, Slotted Hex Machine 10-24 x 2 616512 14 Nut, Hex Nyloc 10-24 Zinc 2 1137014 15 Washer, Lock 5/16" Zinc 4 60597 16 Bolt Hex Cap 5/16"-18 X 3/4" Gr. 5 4 60508 17 Weldment, Connector End 2 HS643-4 18 1 2 3 4 A B C D TITLE DESIGNED DRAWN CHECKED APPROVED DATE c HOG SLAT Incorporated - DATE(S) SHOWN HE THIS COPYRIGHT DRAWING AND THE CONFIDENTIAL INFORMATION CONT ARE THE PROPERTY OF HOG SLAT Inc. AND SHALL NOT BE USE REPRODUCED IN ANY MATERIAL FORM NOR BE DISCLOSED TO THIR WITHOUT THE PRIOR WRITTEN CONSENT OF HOG SLAT Inc T.FULCHER T.FULCHER F.HARRIS F.HARRIS 8/6/2015 HS643 Assembly INTERNAL MANUF NUMBER SHEET 1 OF 1 DWG. HS643 TOLERANCES UNLESS OTHERWISE SPECIFIED: .X = .125 .XX = .032 .XXX = .005 ANGLES = 2 [X] = 3 [.X] = .8 [.XX]= .13 LAS TOLERANCIAS A MENOS QUE SE INDIQUE LO CONTRARIO: MATERIAL SEE NOTES SCALE N.T 11 15 6 13 14 18 2 9 17 1 10 12 7 5 8 4 3 16 #HS643-14 Item# Description Chore-Time® Item# Description Chore-Time® Item# Description Item# Description Item# Description Item# Description Item# Description Chore-Time® HSP05 Pinion Straight 1/2” C3249 Pinion
RkJQdWJsaXNoZXIy MTA3MzU=