Con-Korite™ Xtra is Pure Cement Technology providing a fast-setting, extra abrasion resistant, high strength and non-shrink mortar. It can be used for floor overlays, vertical and horizontal repair without forms, for grouting and building edges, concrete slats, floors, walls, gutters, troughs, walkways and curbs. When mixed with KB25 Acrylic Resin (sold separately), resistance to absorption by corrosive compounds and enhanced bounding properties are added to the repair.
Choose Con-Korite mortar when you want to make a repair one time! It sets within one hour at 70 degrees Fahrenheit. Con-Korite develops 3,000 psi compressive strength in one hour and nearly 10,000 psi in 28 days. This unique formula has exceptional abrasion, salts, and sulfates resistance—making it the longest-lasting and most cost-effective option for severely worn floors and hog slats. It is preferred by pork producers for repair of broken slat edges and to restore eroded slats…even down to the rebar.
Typical Coverage:
25 sq. ft. unextended
50 sq. ft. mixed 1:1 with pea gravel (grouting holes and deep areas over 1 inch)
- Ready for use within 30 min. to 1 hour
- Water, salt & sulfate tolerant
- Exceptional abrasion resistance
- Interior & Exterior use
- Non-Shrink - Tough bond
- 3 to 5 times stronger than other products
- Vertical & Horizontal Use
Con-Korite X'tra Product Data Sheet
Con-Korite X'tra Product Flyer
Con-Korite X'tra Product Literature
Con-Korite X'tra User Guide for Pork Production
Notice: Shipping estimates at checkout may not be accurate due to weight. Large orders of this item may ship on a pallet or by motor carrier. You will be contacted with an accurate shipping amount after placing your order if it is different than what is calculated during checkout.