13 WWW.GAPOULTRY.COM ITEM# DESCRIPTION #H2P-115S 1/2 Hp Submersible Pump, 115 V #H2P-230S 1/2 Hp Submersible Pump, 230 V Submersible Cool Cell Pump Pumps typically used for cool cell systems are adapted from other industries; waste water, sump pumps, etc. They are designed with a higher head pressure and low volume to lift water as high as 35’. We went to one of America’s leading pump manufacturers with a request to build a pump specifically designed for cool cell systems. The submersible pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME. This combination allows our pump to service a longer cool cell run. Operating Range of Evaporative Cool Cell Systems at noted lengths LSP0711 (3/4HP) - 115V LSP0712 (3/4HP) - 230V Avg. Annual Operating cost: $97 * FLOW RATE (GALLONS PER MINUTE) TOTAL HEAD (FT) H2P-115S (1/2HP) - 115V H2P-230S (1/2 HP) - 230V Avg. Annual Operating cost: $75 * * Avg. Annual Operating cost based on the following: 100 days per year use 12 hours per day operation $.10/Kwh energy cost 10 15 20 25 30 35 40 0 10 20 30 40 50 60 70 80 90 100 40FT 60FT 80FT The special impeller allows the use of a 1/2 Hp motor instead of a 3/4 Hp motor. Electrical usage is decreased by up to 25%. GET 3/4 HP PERFORMANCE FROM A 1/2 HP PUMP Rugged Features for a Long Lasting Pump: • Oil-filled motor • Epoxy coated, cast iron housing • 2” discharge with 1-1/2” bushing to adapt to most systems • 2” bottom suction inlet • 15’ waterproof power cord • Silicon carbide seal • 115 / 230 Volt- 5.5/2/7 amps • 15.87” high x 9.5” wide *These pumps are only for 10” or larger reservoirs and will not work in 8” sump tanks. Jet Pump The Compact Jet Pump delivers outstanding performance. Efficient design minimizes friction and turbulence reducing power consumption. Self-priming pump design protects internal components from wear. Strainer basket features a Transparent Lid for easy inspection. Larger capacity extends time between clean out. Easy access drain plug for service and winterizing. Features Include: • Available as 120 or 240 volt models • Includes 9 foot power cord • 1-1/2” discharge pipe • Open drip proof motor FLOW RATE (GALLONS PER MINUTE) TOTAL HEAD (FT) 10 20 30 40 50 60 70 0 20 40 60 80 100 120 140 H2H-120J H2H-240J ITEM# DESCRIPTION #H2P-120JA 3/4 Hp Jet Pump, 120 V #H2P-240J 3/4 Hp Jet Pump, 240 V Extension Kit for Round Pipe Cool Cell Systems 10’ Add-on Kit for Round Style 8” Trough Evaporative Cooling System Includes trough, cover, sprayer, deflector, pad retainer and 8” trough. Does not include pad or end panel. ITEM# DESCRIPTION #HSES-RA10 Extension Kit WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
RkJQdWJsaXNoZXIy MTA3MzU=