Swine Steel Housing Equipment 1-800-949-4647 | www.hogslat.com | World Leader in Swine Production Solutions
2 SWINE STEEL HOUSING EQUIPMENT Gestation Stalls Hog Slat gestation stall equipment provides pork producers with the ability to house pregnant sows before and during gestation while effectively managing their feed intake, body condition and well-being. Quality Design Hog Slat gestation stalls incorporate design features perfected over 30+ years of manufacturing and are trusted by pork producers around the world for their sow housing needs. • 1-1/2” angle top and bottom frame, ½” horizontal rods and strategically spaced vertical upright supports along the panel creates a strong stall that can handle large, full grown sows. Also available with solid rod bottom, and stainless steel legs and floor spacers. • Integrated feed drop tube pipe delivers feed from the sow drop system directly in front of each pig and will work with both floor feeding and stainless steel trough feeding setups. Also available with bolt on feed pipe. • Front and rear stall gates are available with trapped in gate rod; or tab/ pipe combination that provides gate rods with additional protection. Rear stall gates feature EZ-Clip latch that allows the gate to be opened to the left or to the right to facilitate easy loading and un-loading in the barn. • Hog Slat sow bowls and SowMAX feeders can be installed on straight front stall gates, providing producers with the ability to offer ad-lib feeding or post-farrowing sows before being bred. • Available with bolt on feed pipe. Hog Slat gestation stalls feature a bolttogether design that saves on installation time and maintenance costs over the lifespan of our equipment Our “NO-WELD” stall installation design uses pre-punched top bar spacers and floor spacers; resulting in faster and straighter assembly than competitive models welded on-site. Durable solid steel construction is built to last; available with either our signature blue powder-coat epoxy paint or hot-dipped galvanized finishes. Reduced Cost to You No-Weld Installation Quality Finish EZ-Clip Latch The EZ-Clip latch traps the gate rods, preventing rods to pull completely out. Trapped Pin Latch WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
3 WWW.HOGSLAT.COM Slope Front, AI Back Straight Front, AI Back Slope Front, Slope Back Straight Front, Slope Back Slope Front, Straight Back Straight Front, Straight Back Slope Front, Modified AI Back Straight Front, Modified AI Back 25” 3 1/2” 5 1/2” 29” 7 1/2” 1 1/2” 6” 5 5/8” 7” 4” 1 3/8” 1 1/2” 6” 6 3/8” 4 3/8” 1 3/8” #8950590505.....304 SS trough, single side bolt down, 8’ long, 31 lbs #8000140500........................................304 SS solid end plate, 2.2 lbs #8000130500....................304 SS end plate with 2” nipples, 2.2 lbs Gestation Trough • Single sided bolt down #8950590511.304 SS trough, double sided bolt down, 8’ long, 39 lbs #8000150500........................................304 SS solid end plate, 2.5 lbs #8000340500...................304 SS end plate with 2” nipples, 2.5 lbs Gestation Trough • Double sided bolt down #8950580540....................304 SS double trough, 8 long, 60 lbs #8000830500................................304 SS double solid end, 4 lbs #8000840500.............304 SS end plate w/ (2) 2” nipples, 4 lbs Gestation Trough • Doubled sided bolt down Gestation Troughs • 8’ Section • 18 Gauge • 10” x 3-3/4” • Solid End Plate • Trough end with 2” nipple • 304 Series Stainless Steel Flexible Sizing Hog Slat gestation stalls are available in 8 different configurations to meet the feeding, layout and operational needs of any swine breeding farm. Stall Length Options: 7’0” or 7’6” Stall Width Options: 22”, 23”, 24”, 25”, 26” and 28”
4 SWINE STEEL HOUSING EQUIPMENT Stanchions Hog Slat stanchion systems were designed with features and benefits to increase sow comfort, worker safety and producer efficiency in the barn. Our stanchion design is easily installed, and minimizes the amount of total maintenance and required training over the lifetime of the equipment. • Stanchion divider partitions are available with an open solid rod, solid sheet metal or PVC sheet design. • Hog Slat stanchion systems are available with multiple width and length options to adapt to any new construction or remodeling building project. • Stanchion equipment options provide flexibility in pen sizing to accommodate a variety of building dimensions and sow group sizes. • Optional double or single-sided stainless steel sow feeding trough options are available to protect concrete floors or allow feeding on total slat barns. • Available with bolt on feed pipe. Hog Slat stanchion systems are well suited to current US production practices: • Farm staff can more easily make the transition to a stanchion system because it uses the same feed delivery system as traditional gestation stall barns. • Stanchions do not require a staff highly trained in maintaining and troubleshooting complicated electronic systems. • Stanchions closely resemble traditional stall feeders which means sows do not have to go through a “training period” that ESF systems require. • Individual sows and sow groups are easily located in a barn, allowing them to be managed and cared for easier than other group housing systems. The bolt-together assembly design of Hog Slat stanchions allows for fast, aligned and squared installations every time. Stanchion layouts can be designed to integrate with existing feed systems, minimizing the need to train employees on operation and maintenance of complicated new equipment. • First, hot-dipped galvanized floor spacers are installed on the slats/flooring, and then stanchion panels are bolted in place and secured with matching top spacing bars. • Pre-punched floor and top spacing bars align with each other to ensure stanchion dividers are equally spaced and completely square from top to bottom. Simple Installation Flexibility Easy To Use
5 WWW.HOGSLAT.COM Top Strap Front Rods Floor Strap Double-Sided Configuration Single-Sided Configuration Practical Design Considerations Head-to-Head Layout • A preferred layout on new construction stanchion systems is a head-to-head feeding design; which reduces the total number of feed lines and maximizes the use of other equipment such as feed troughs and front aisle gates. • With all feeding stations located on one side of the pen; a clean, open pen design is created, providing the ability to easily monitor and observe sows while feeding and resting. Dual Side Layout • When remodeling existing stall buildings, stanchions can be installed on both sides of each pen to utilize existing troughs, feed lines and slats. • Stanchion spaces in the pens are still spaced far enough apart on both sides to prevent dominant sows from blocking traffic and allow all sows to freely move throughout the pen. Penning Hog Slat stanchion pens can be installed with walk-through posts and optional “saloon-style” doors. The 3” posts anchor the penning panels and allow workers to slip between them while checking sows in each pen. Hog Slat stanchion systems are flexible enough to be installed in a variety of barn designs; allowing new construction projects to maximize production efficiencies, and remodeling projects to incorporate existing feed lines and equipment into the layout to control investment costs during a transition.
6 SWINE STEEL HOUSING EQUIPMENT Hog Slat Free Access Stall Features: Practical Design Considerations • Galvanized • Step through gate design for breeding • Rear individual locks to retain an animal when unlocking the rest of the row. • Lock design to allow unlocking from rear using a paddle to remove animal from locked row. • Balanced gates do not require other mechanical devices • Standard gestation stall front gate • Bolt on Feed Pipe • Double Waterer • Adjustable stainless steel legs and feet. Free Access Stall Bumpers Placed for both up and down door positions for quiet operation. Step Through Rear Gate with rear individual locks permitting the retention of an animal when unlocking the rest of the stalls. Row Locking Arm Row locking arm for locking and unlocking row All pivot points have SS sleeve bushings and large pivot surfaces Stainless steel legs adjust to fit slat openings and height differences for secure anchoring. Feed pipe and double water bracket bolt on stall. Pivot Points • Stainless Steel Hardware • 5/8” steel rods • 12 gauge structural grade pipe • All pivot points have Stainless Steel sleeve bushings and large pivot surfaces.
7 WWW.HOGSLAT.COM Advantage Farrowing Crates are available with these options: Advantage Farrowing Crate Hog Slat’s Advantage farrowing crate sets the standard for all other farrowing crates. It is the most versatile of all of our crate designs. Advantage crates are available in tubular or solid rod construction and with choices of finger bar or bow bar on each side panel. • Hog Slat’s Advantage farrowing crate is the most versatile design on the market and sets the standard for quality and production efficiency. • Universal mounting foot allows Advantage crates to be installed on almost any existing flooring. • Hog Slat head gates, rear doors, feeders and creep dividers are available for all new equipment installations. • Three side bar options are available (with/without anti-crush bar) to build a crate that meets your specific needs, including; finger bars, bow bars and solid bars (with/without anti-crush bar). • Adjustable finger-style side bars enhance piglets’ access to the teats and allow modifications for different sized sows and gilts. • Anti-crush bars flip out of the way when sows stand, but prevent them from "flopping" on their sides when laying down, reducing piglet losses from crushing. • Advantage crates are easy to assemble, requiring as few as 12 bolts total depending on side bar options. • Optional heat lamp hanger arm and 10” chart plate can be attached to the crate. • Solid rod and tubular metal models available in 7’0”, 7’6” and 8’ lengths. • Available in either our classic blue powder-coated epoxy paint or hot-dipped galvanized finishes. Adjustable to Fit Any Width Fits easily in place of old crates and allows you to use your existing creep divides. Several Side Bar Options Allows you to build the crate that works the best for you. Options include: finger bar, finger bar with anti-crush bar, bow bar and bow bar with anti-crush bar. Multiple Feed and Watering Options Choose the feeder and water option that fits your needs: large or small bowl feeder, ad lib feeder or keep the feeder you have. Water with nipples or cups. It’s your choice.
8 SWINE STEEL HOUSING EQUIPMENT Key Part# Qty. Description Order onlin 68 FARROWING Advantage Crate Parts List 1 1250500002 2 SIDE 7’-0” 1 1250542001 2 SIDE 7’-6” 2 1250420000 1 FINGER BAR 7’-0” 2 1250460000 1 FINGER BAR 7’-6” RIGHT [85”] 3 125042000 1 FINGER BAR 7’-0” 3 1250470000 1 FINGER BAR 7’-6” LEFT [85”] 4 1250410000 2 BOLT-ON BAR 7’-0” 4 1250380000 2 BOLT-ON BAR 7’-6” 5 1250400000 2 BOW BAR 7’-0” 5 1250370000 2 BOW BAR 7’-6” 6 1260370000 2 SOLID ANTI-CRUSH BAR 40-3/4” 7 1250780500 2 ANTI-CRUSH BAR STOP 8 1250050000 1 WATER BRACKET BENT 9 8150620500 1 SAMPSON WATERER SS [LARGE BOWL DOOR & SMALL BOWL CENTERED DOOR] 10 8150600700 1 EUROPEAN WATERER [SMALL BOWL OFFSET DOOR] 11 1250790500 4 U-CHANNEL 12 1250850000 2 TOP STRAP 23-7/16 13 1250810000 1 TOP CENTER STRAP 40-1/2” 14 1000970700 1 CHART PLATE 10” 15 1000160000 1 HEAT LAMP ARM 16 1260101100 1 FRONT DOOR OFFSET [SMALL BOWL] ASSEMBLY 17 1250261100 1 FRONT DOOR [SMALL BOWL] ASSEMBLY 18 1250281101 1 FRONT DOOR [LARGE BOWL] ASSEMBLY 19 7150040500 1 SOW FEEDER [SMALL BOWL] 304 SS 20 7150070500 1 SOW FEEDER [LARGE BOWL] 304 SS 21 1230050000 1 RETAINER ROD [SMALL BOWL OFFSET] 21 5150020000 1 RETAINER ROD [LARGE BOWL & SMALL BOWL CENTERED] 22 1231160000 1 PIVOT ROD [SMALL BOWL OFFSET] 22 5150010000 1 PIVOT ROD [LARGE BOWL & SMALL BOWL CENTERED] 23 9900020000 2 HAIR CLIP PIN (60635) 24 1250200020 1 REAR DOOR 25 1250900700 1 REAR DOOR (SHEET METAL) 25 1250890000 1 REAR DOOR (POLYBOARD) 26 1250310000 1 BOLT-ON RUMP RAIL 27 1000100000 4 1/2” X 19-3/4” CRATE ROD Key Part# Qty. Description Key P Advantage Farrowing Crate (Tubular) Ad Far Cra (So 1 1 1 1 1 1 2 1 2 1 2 1 3 1 3 1 4 1 4 1 5 1 6 1 7 1 8 1 9 1 10 8 11 1 12 1 13 1 14 1 15 1 15 1 16 1 17 1 18 7 19 7 20 5 21 5 22 9 23 1 24 1 25 1 26 1 SIDE 7’-0” SIDE 7’-6” GER BAR 7’-0” 6” RIGHT [85”] GER BAR 7’-0” ’-6” LEFT [85”] T-ON BAR 7’-0” T-ON BAR 7’-6” BOW BAR 7’-0” BOW BAR 7’-6” H BAR 40-3/4” USH BAR STOP BRACKET BENT E BOWL DOOR & ENTERED DOOR] OFFSET DOOR] U-CHANNEL STRAP 23-7/16 STRAP 40-1/2” ART PLATE 10” EAT LAMP ARM WL] ASSEMBLY WL] ASSEMBLY Description Key Part# Qty. Description Advantage Farrowing Crate (Solid Rod) 1 1260600000 1 7’ SIDE BOW BAR [RIGHT] 1 1260600001 1 7’ SIDE FINGER BAR [RIGHT] 1 1260610004 1 7’-6” SIDE FINGER BAR [RIGHT] 2 1260500000 1 7’ SIDE BOW BAR [LEFT] 2 1260500001 1 7’ SIDE FINGER BAR [LEFT] 2 1260510004 1 7’-6” SIDE FINGER BAR [LEFT] 3 1260420000 1 7’ SOLID FINGER BAR 3 1260430000 1 7’-6” SOLID FINGER BAR [RIGHT] 4 1260420000 1 7’ SOLID FINGER BAR 4 1260440000 1 7’-6” SOLID FINGER BAR [LEFT] 5 1260400000 2 7’ SOLID BOLT-ON BAR 6 1260450000 2 FINGER/BOLT-ON BAR BRACE 7 1260460000 2 7’ SOLID BOW BAR 8 1260470000 2 BOW BAR BRACE 9 1260370000 2 ANTI-CRUSH BAR 10 8150620500 1 SAMPSON WATERER SS 11 1260890000 2 WATERER BACKUP PLATE 12 1260800000 2 TOP STRAP 13 1250810000 1 TOP CENTER STRAP 14 1000970700 1 CHART PLATE 10” 15 1000120000 1 7’ HEAT LAMP ARM 1 1250500002 2 Side 7’-0” 1 1250542001 2 Side 7’-6” 2 1250420000 1 Finger Bar 7’-0” 2 1250460000 1 Finger Bar 7’-6” Right [85”] 3 125042000 1 Finger Bar 7’-0” 3 1250470000 1 Finger Bar 7’-6” Left [85”] 4 1250410000 2 Bolt-On Bar 7’-0” 4 1250380000 2 Bolt-On Bar 7’-6” 5 1250400000 2 Bow Bar 7’-0” 5 1250370000 2 Bow Bar 7’-6” 6 1260370000 2 Solid Anti-Crush Bar 40-3/4” 7 1250780500 2 Anti-Crush Bar Stop 8 1250050000 1 Water Bracket Bent 9 8150620500 1 Sampson Waterer SS [Large Bowl Door & Small Bowl Centered Door] 10 8150600700 1 European Waterer [Small Bowl Offset Door] 11 1250790500 4 U-Channel 12 1250850000 2 Top Strap 23-7/16 13 1250810000 1 Top Center Strap 40-1/2” 14 1000970700 1 Chart Plate 10” 15 1000160000 1 Heat Lamp Arm 16 1260101100 1 Front Door Offset [Small Bowl] Assembly 17 1250261100 1 Front Door [Small Bowl] Assembly 18 1250281101 1 Front Door [Large Bowl] Assembly 19 7150040500 1 Sow Feeder [Small Bowl] 304 SS 20 7150070500 1 Sow Feeder [Large Bowl] 304 SS 21 1230050000 1 Retainer Rod [Small Bowl Offset] Advantage Crate Parts List - (Tubular) Key Part# Qty. Description 1 1260600000 1 7’ Side Bow Bar [Right] 1 1260600001 1 7’ Side Finger Bar [Right] 1 1260610004 1 7’-6” Side Finger Bar [Right] 2 1260500000 1 7’ Side Bow Bar [Left] 2 1260500001 1 7’ Side Finger Bar [Left] 2 1260510004 1 7’-6” Side Finger Bar [Left] 3 1260420000 1 7’ Solid Finger Bar 3 1260430000 1 7’-6” Solid Finger Bar [Right] 4 1260420000 1 7’ Solid Finger Bar 4 1260440000 1 7’-6” Solid Finger Bar [Left] 5 1260400000 2 7’ Solid Bolt-On Bar 6 1260450000 2 Finger/Bolt-On Bar Brace 7 1260460000 2 7’ Solid Bow Bar 8 1260470000 2 Bow Bar Brace 9 1260370000 2 Anti-Crush Bar 10 8150620500 1 Sampson Waterer Ss 11 1260890000 2 Waterer Backup Plate 12 1260800000 2 Top Strap Advantage Crate Parts List - (Solid Rod)) Key Part# Qty. Description 21 5150020000 1 Retainer Rod [Large Bowl & Small Bowl Centered] 22 1231160000 1 Pivot Rod [Small Bowl Offset] 22 5150010000 1 Pivot Rod [Large Bowl & Small Bowl Centered] 23 9900020000 2 Hair Clip Pin (60635) 24 1250200020 1 Rear Door 25 1250900700 1 Rear Door (Sheet Metal) 25 1250890000 1 Rear Door (Polyboard) 26 1250310000 1 Bolt-On Rump Rail 27 1000100000 4 1/2” X 19-3/4” Crate Rod Key Part# Qty. Description 13 1250810000 1 Top Center Strap 14 1000970700 1 Chart Plate 10” 15 1000120000 1 7’ Heat Lamp Arm 15 1000160000 1 7’-6” Heat Lamp Arm 16 1250261100 1 Front Door [Small Bowl] Assembly 17 1250281101 1 Front Door [Large Bowl] Assembly 18 7150040500 1 Sow Feeder [Small Bowl] 304 Ss 19 7150070500 1 Sow Feeder [Large Bowl] 304 Ss 20 5150020100 1 Retainer Rod 21 5150010000 1 Pivot Rod 22 9900020000 2 Hair Clip Pin (60635) 23 1260200000 1 Rear Door 24 1250900700 1 Rear Door Punch 25 1250310000 1 Bolt-On Rump Rail 26 1000100000 4 1/2” X 19-3/4” Crate Rod WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
9 WWW.HOGSLAT.COM Ultimate Crate Parts List 1) #1700100100.....Ultimate Crate Front Door (small feeder) #1700110100...Ultimate Crate Front Door (large feeder) 2) #1700800100..................Ultimate Crate Top 51” 3) #1700650100...Ultimate Crate Side Right (7’6”) #1700600100..Ultimate Crate Side Right (7’0”) 4) #1170550100.....Ultimate Crate Side Left (7’6”) #1700500100...Ultimate Crate Side Left (7’0”) 5) #1700900000..Ultimate Crate Rear Door PVC Panel 6) #1700010100......Ultimate Crate Rear Gate Rod 7) #1700300100.............Ultimate Crate Rump Rail 8) #1700200100.............Ultimate Crate Rear Door 9) #1240400100....Ultimate Crate Anti-Crush Bar 10)......................................................................... Feeder 11) #1000970700...............................Chart Plate 10” 12) #8150620700..........Sampson Waterer (56612) 13) #7150890500............................SowMAX Feeder 14) #60539.............................................1/2” x 3” Bolt 15) #60683..............................................1/2” Locknut 16) #9403752102..........................3/8” x 1-1/2” Bolt 17) #9623750310..................................3/8” x 1” Bolt 18) #60581........................................3/8” Flatwasher 19) #60682.............................................3/8” Locknut 20) #60702....................U-bolt 5/16” x 1-3/8” x 1-13/16” 21) #60681.............................................5/16” Locknut 22) #60531.........................................1/4” x 3/4” Bolt 23) #60680............................................1/4” Locknut 24) #9623130511........................1/4” x 1-3/4” U-bolt Ultimate Farrowing Crate Hog Slat’s Ultimate farrowing crate is designed for maximized adjustability to meet the needs of pork producers remodeling existing farrowing barns or building new construction units. •The rear door on Ultimate farrowing crates is built with a solid rod frame and features a high-density polyurethane (HDPE) solid plastic door panel and double vertical rump rails to prevent piglets from getting caught behind the sow. •Loop style finger bars are a welfare-friendly design, precisely placed to provide excellent teat access and protection for nursing pigs. •Standard anti-crush bars flip up and down to slow a sows movement when transitioning from standing to laying, increasing litter survivability by allowing piglets extra time to move away. •Ultimate farrowing crates can be outfitted with a front head gate door that is designed to fit either our large or small style sow feeding bowls. •An optional large wet/dry sow feeder bowl can be installed that features a pivoting, tip-out design for easy cleaning and 16” width for maximum head space and sow comfort. •Available in 7’0”, 7’6” and 8’0” lengths. •Available in either our classic blue powder-coated epoxy paint or hot-dipped galvanized finishes. Solid-Rod Rear Door Constructed of 7/8” solid rod steel for strength and corrosion resistance. It comes with a plastic rear door panel, standard. Lift the rear door to clear out behind the sow without opening the door or fumbling with latches. Loop Finger Bars Welfare-friendly loop style fingers precisely placed for excellent teat access and pig protection. Standard anti-crush bars slow sow’s descent to save pigs and flip up when sow stands. Large Wet/Dry Bowl Feeder Optional large Wet/Dry sow feeder features pivot-inplace, tip-out easy cleaning. 16” width provides maximum head room for sow comfort. WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
10 SWINE STEEL HOUSING EQUIPMENT THE SAMPSON CRATE WILL INCREASE LITTER SURVIVAL! 1) #1010640111...............................................................Sampson Side 7’0” Rt. #1010650111...............................................................Sampson Side 7’6” Rt. #1010640100.......................Sampson Side 7’0” Rt. (Old Style 1994-95) #1010650100........................Sampson Side 7’6” Lt. (Old Style 1994-95) 2) #1050200100.............................................................Rear Door (Standard) #1010230100..............................................Rear Door (Bolt-On Rump Rail) 3) #1010540111..............................................................Sampson Side 7’0” Lt. #1010550111...............................................................Sampson Side 7’6” Lt. Sampson Crate Parts List - Painted 2 3 8 11 6 7 7 6 9 14 11 11 24 17 25 15 4 23 21 15 19 20 13 12 16 15 15 11 18 20 19 26 5 28 18 28 10 22 1 #1010640111 .................................................................................................Sampson Side 7’0” Rt. #1010650111 ................................................................................................Sampson Side 7’6” Rt. #1010640100 ............................................................Sampson Side 7’0” Rt. (Old Style 1994-95) #1010650100 ............................................................Sampson Side 7’6” Lt. (Old Style 1994-95) #1050200100 ..................................................................................................Rear Door (Standard) #1010230100 ..................................................................................Rear Door (Bolt-On Rump Rail) #1010540111 .................................................................................................Sampson Side 7’0” Lt. #1010550111 .................................................................................................Sampson Side 7’6” Lt. mpson Crate, Painted 16 17 7 4 4 14 19 19 13 15 3 1 9 18 8 8 11A 19 12 4 5 6 6 4 16 17 21 21 21 21 22 22 2 2 10 10 13 20 11B 11C #1230140101 .....................................................................................................................Front Door #1230500100 ..............................................................................................................Left Side 7’0” 5) #1230380100 ....................................................................................... Right Side Fin #1230390100 ....................................................................................... Right Side Fin 6) #1230810100 ................................................................................................................... 7) #1230820100 .................................................................................................................. 8) #1230800100 .................................................................................................................. 9) #1230300100 .................................................................................................................. 10) #7150040500 ................................................................................................Small Fee 11) #1000100100 .........................................................................................Gate Rods 1/2 12) #1231160100 ................................................................................................................. 13) #1230050100 ...........................................................................................Retainer Ro 14) #1230310100 ........................................................................................................... Ru 15) #60635 ......................................................................................................................... H 16) #8150600700 .................................................................................................Nipple 17) #1000120100 ............................................................................................... Heat Lam 18) #1230400100 ........................................................................................... Bow Bar 7’ #1230410100 ...........................................................................................Bow Bar 7’ 19) #1230440100 ...........................................................................................Bow Bar 7’ #1230450100 ...........................................................................................Bow Bar 7’ 21) #1230100100 .................................................................... Euro Front Door (Flat Bot 22) #7150070500 ..............................................................................................Large Fee 23) #1231320100 ................................................................................................Europea 24) #1230200100 .............................................................................................................. #1010540100 .............................................................Sampson Side 7’0” Lt. (Old Sty #1010550100 .............................................................Sampson Side 7’6” Rt. (Old Sty 4) #1000100100 .......................................................................................................19-3/ 5) #1010810102 ................................................................................................................... 6) #1010830100 ................................................................................................................... 7) #1010850100 ................................................................................................................. 8) #1010820102 ...............................................................................................................L 9) #1000970700 ..........................................................................................................Ch 10) #1010150100 ................................................................................ Front Door (Small #1010160100 ................................................................................ Front Door (Large 11A) #1010340100 .............................................................................................. Rump R 11B) #1010380101 ........................................................................Rump Rail Murphy St 11C) #1010300100 ............................................................................................................. 12) #1010350100 ......................................................................................................... Ru 13) #7150040500 ............................................................................Feeder (Small Platin #7150070500 ............................................................................ Feeder (Large Platin 14) #1100050100 .............................................................................................................R 15) #1101160100 ................................................................................................................ 16) #1010400100 ......................................................................................Pivot Bar 57- #1010410100 ........................................................................................Pivot Bar 6317) #1010420103 ............................................................................................................. B #1010430103 ............................................................................................................B #1010420100 ..........................................................................................Bow Bar 7’0 #1010430100 ..........................................................................................Bow Bar 7’6 18) #1000120100 ........................................................................................................Hea 19) #60635 ........................................................................................................................ H 20) #8150620700 .......................................................................................................Sam 21) #1014990000 .......................................................................................................... Ru 22) #1050900700 ........................................................................Sheet Metal Rear Doo #1010900700 .......................................................Sheet Metal Rear Door (Bolt-On #8090611101 ...............................................................................................Polyboard ropean Crate #1010540100........................Sampson Side 7’0” Lt. (Old Style 1994-95) #1010550100.......................Sampson Side 7’6” Rt. (Old Style 1994-95) 4) #1000100100.....................................................................19-3/4” Gate Rod 5) #1010810102....................................................................................Short Top 6) #1010830100.....................................................................................Side Top 7) #1010850100....................................................................................Front Top 8) #1010820102..............................................................................Long Top #3 9) #1000970700.......................................................................Chart Plate 10” 10) #1010150100..............................................Front Door (Small Bowl Ass’y) #1010160100.............................................Front Door (Large Bowl Ass’y) 11A) #1010340100..............................................................Rump Rail, Hanging 11B) #1010380101.......................................Rump Rail Murphy Style, Bolt-On 11C) #1010300100...............................................................................Rump Rail 12) #1010350100.........................................................................Rump Rail Rod 13) #7150040500.......................................Feeder (Small Platinum) 304 SS #7150070500.......................................Feeder (Large Platinum) 304 SS 14) #1100050100...........................................................................Retainer Rod 15) #1101160100....................................................................................Pivot Rod 16) #1010400100....................................................Pivot Bar 57-1/2” for 7’0” #1010410100.....................................................Pivot Bar 63-1/2” for 7’6” 17) #1010420103...........................................................................Bow Bar 7’0” #1010430103............................................................................Bow Bar 7’6” #1010420100.......................................................Bow Bar 7’0” (1994-95) #1010430100.......................................................Bow Bar 7’6” (1994-95) 18) #1000120100......................................................................Heat Lamp Arm 19) #60635.......................................................................................Hair Clip Pin 20) #8150620700....................................................................Sampson Water 21) #1014990000.......................................................................Rubber Sleeve 22) #1050900700...................................Sheet Metal Rear Door (Standard) #1010900700....................Sheet Metal Rear Door (Bolt-On Rump Rail) #8090611101..............................................................Polyboard (Standard) Sampson Farrowing Crate Hog Slat’s Sampson farrowing crate has 25+ years of proven excellence in the field. The Sampson crate is designed with pig saving features that will help increase piglet litter survival rates while also providing exception sow comfort. • Sampson farrowing crates feature a unique flip bar that allows both sides of the crate to adjust up and down, slowly and gently lowering the sow to the floor when she transitions from standing to laying. • The adjustable crate sides allow sows to nurse in comfort while laying down, and adjust in closer to her body while standing to create a large, safe area for pigs in the creep area. • Sampson crates are equipped with a double nipple water pipe with a sow drinking nipple on top and a smaller piglet drinking nipple on the bottom close to the floor. • The rump rail stays in place when the rear door is opened, keeping the sow in place while also making clean out or birthing assistance tasks easier to complete. • Rear rump rail is also adjustable, allowing it to be moved into the correct position depending on whether a sow or gilt is loaded into the farrowing crate. • Hog Slat large or small sow feeder bowls can be mounted to the head gate; both featuring a pivoting tipout design to make feeder cleaning a simple task. • Available in 7’0” and 7’6” lengths. • Available in either our classic blue powder-coated epoxy paint or hot-dipped galvanized finishes. Galvanized, Stainless Steel, and PVC Creep Panels • Hog Slat manufactures rugged, galvanized steel creep divider panels constructed of 16 gauge steel. Creep Panel Corner Posts ACCESSORIES Farrowing Crate Waterers Different configurations are available for farrowing crate waterers. Waterers are available in galvanized or stainless steel, with sow and piglet nipples included. Variety of corner posts and connections available to meet your building layout needs. • Standard height creep panels are 21-7/8” tall. • Available in custom lengths to match existing or new farrowing crates and flooring configurations. • Metal creep dividers are easily pressure washed and disinfected between pig groups. • Metal panels resist cracking and prevent harboring bacteria and pathogens unlike PVC dividers. • PVC Dividers are available WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
11 WWW.HOGSLAT.COM International Crate Developed with precision engineering to best improve your operational efficiencies. • Crate sizing designed to meet all applicable animal welfare standards • Constructed with the same great pig saving features Hog Slat farrowing crates are known for in the USA. Design Features • Front and rear doors are secured by gate drop rods, allowing them to be opened toward either side to provide easy entry/exit for sows • Hog Slat farrowing crate head gates are pre-punched to simplify installation of SowMAX Ad-Lib feeders. • Adjustable bow bar allows you to better control space for sow and pig. Hog Slat offers an international farrowing crate design that is available to meet the needs and requirements for pork producers in the European Union (EU) and other markets outside the USA. WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
12 SWINE STEEL HOUSING EQUIPMENT • 24-1/2” to 27” adjustable width • 20% space efficiency design • Floating anti-crush bars Crate door quickly detaches to allow the sides to swing apart - allowing the sow to turn around for exit. This enables the use of a head-to-head floorplan, eliminating valuable space once used for walkways. Hog Slat’s Swing Side provides maximum flexibility in crate design when undertaking complex remodeling or state-of-art new construction. Choose from multiple options to build the best farrowing crate for your next project. Swing Side Farrowing Crate • Base model with stationary head gate mounts against wall or head-to-head layouts. SowMAX feed dispenser eliminates need for front alley. • Choose a Walk-Thru gate for floor plans with a front alley. Shown with small bowl feeder, SowMax and bow bar sides. All models are available in tubular or solid rod construction. • Customize the Swing Side crate with finger bar sides, large capacity feeder with either a galvanized or painted finish. Options include several styles of rear gates. The crates sides swing open to aid sow handling when filling or unloading crates. Anti-crush bar slows sow ascent to limit pig losses. Divided pan feeder with water nipple • Hot-dipped galvanized finish • Stainless Steel Components Feeder, Water Pipe and Nipple Rear Gate Styles WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
13 WWW.HOGSLAT.COM 31.5” H - 7 Rod. .........................Nursery/Wean-to-Finish/Finishing 36” H - 8 Rod................................................Special Wean-to-Finish 40” H - 6 Rod.....................................Standard Gestation/Breeding 40” H - 9 Rod........Special Gestation for Wean/Gilt Development Hog Slat penning panels are available in the following standard height options: Hog Penning Equipment Hog Slat manufactures and supplies a complete line of economical steel penning and gating equipment for nursery pigs, wean-to-finish hogs and breeding swine barn confinement needs. Our swine penning equipment is fabricated in our USA manufacturing facilities; allowing us to control and ensure the quality of our gating products throughout the entire production process. • Standard penning fence panels feature 1/8” x 1-1/2” angle top bars. • Solid 1/2” horizontal rods and a beefy 3/4” solid rod bottom rail design endures wear from large hogs and barn environments for a long lifetime. • 2” vertical uprights are standard (1-1/2” available on request). • Reliable finish quality welds you can depend on to minimize maintenance tasks. • Horizontal rods are spaced closer together toward the bottom of all gating panels to adequately contain pigs of all sizes, prevent injury and provide additional strength where it’s needed most. • Hog Slat gating panels are shot-blasted and treated before painting to remove any present rust, grease or scale. • Powder epoxy paint is electrostatically applied and oven-bake cured for a long lasting finish that provides superior protection versus dipped or sprayed conventional paint finishes from other manufacturers. • Available with hot-dipped galvanized finish for increased corrosion resistance (ASTM A123). • Gating available to meet the barn design and equipment layouts for any grower or integrator requirements. • Since the late 1970’s, Hog Slat has built and installed penning in just about every type of swine building there is and can manufacture solutions that meet any unique needs existing in confinement pig production. • Standard wall/wall, aisle/wall, aisle/feeder, feeder/wall penning styles available in a variety of lengths; as well as other more unique design options built to fit your specific gating needs. • Hog Slat penning, gate posts and other installation accessories are available in a long lasting corrosion resistant galvanized finish. Durable Finish Hog Slat Horizontal Gating Panels Solid Construction Quality Design
14 SWINE STEEL HOUSING EQUIPMENT SowMAX offers these advantages: 100% Stainless Steel construction. There are no plastic parts to wear or go out of adjustment. No motors or electronics. Many systems use a metering motor to dispense the feed and ear tags to start the motor. SowMAX uses the simple action of the sow activating a lever - no motors to replace or ear tags to lose. Adapts to existing feeders and delivery systems. Choose from a 16 lb. hopper for hand filling or install with a feed system to automatically fill the dispensers. Adapts to most existing farrowing feeders with simple brackets. Positive actuation and adjustment. Other systems utilize a bumper ball or bar that can vary in the amount of feed delivered. With SowMAX, you adjust the amount, and the trigger mechanism dispenses that exact amount every time the sow activates the lever Illustrated SowMAX manual with instructions for feeding lactating sows. Download your free copy at www.hogslat.com Learn more about the advantages of SowMAX dispensers feeding weaned sows in breeding. Go to www.hogslat.com and search for SowMAX. You’ll find blogs and videos with more information. SowMAX eBook With SowMAX you’ll do a better job of feeding lactating sows and you’ll do it with less labor. Fill the hopper in the morning and fresh feed is always available... day or night. Reduce labor. Reduce feed waste. Feed sows better. SowMAX Dispenser #7150890500.....SowMAX dispenser (439 SS) Mounting Hardware Requires Two Each 1) #60501 1/4” x 3/4” zinc bolt 1) #60680 1/4” lock nut SowMAX Hopper #HS535.................................Plastic 16 lb. hopper
15 WWW.HOGSLAT.COM Sow Feeders A) #7150040500..........................................................................................................14” x 15” Small Bowl B) #7150070500..........................................................................................................16” x 24” Large Bowl C) #7150780500.......................................................................Wet/Dry sow Feeder w/ pipe nipple right #7150800500..........................................................................Wet/Dry sow Feeder w/ pipe nipple left (does not include AquaFlo Trigger Nipple, see page 123) D) #7160230500............................................................................................16” sow feeder w/ divide, left #7160290500.........................................................................................16” sow feeder w/ divide, right E) #8152191500...........................................................................................................48” SS pipe w/ nipple D. A. B. Heavy galvanized steel hopper available in 200 and 400-pound sizes. Painted grain gate with 8” x 20” opening fills feed carts fast. Mounts from the ceiling with four 36” long painted brackets. Unassembled. Feed Hoppers w/ Grain Gate #7060611700................................................................................................24” x 36” x 32” Unassembled #7060621700................................................................................................12” x 36” x 32” Unassembled #7000360000........................................................................................................1/4’’ x 2’’ x 36’’ Brackets 12” or 24” 33” Farrowing Drop Feeder #HS738.............................Farrowing drop feeder • Flexible sleeve for full range of movement • Spring-loaded stainless steel discharge cup • 3” x 36” drop tube with volume markings and slide band C. E. WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Sow Feeder with PVC tube #7160250500.16” wide, Left (pictured above) #7160251500...............................16” wide, Right #HS535-E................................................... Hopper Hand crank adjusts tube height with indexed markings for repeatable settings. #HS535-E
1-800-949-4647 | www.hogslat.com | World Leader in Swine Production Solutions *Updated 01-2024
hogslat.comRkJQdWJsaXNoZXIy MTA3MzU=