Swine Ventilation Systems 1-800-949-4647 | www.hogslat.com | World Leader in Swine Production Solutions
2 VENTILATION SYSTEMS AS-14EDDLP 14” w/o cone Plastic 20” x 20” 1725 Direct Variable 1/4 AS-14EDDLP-V 14” w/VFD drive w/o cone PVC 20” x 20” 1725 Direct Variable 1/3 (3 Ph) AS-14EDDLP-L 14” w/o VFD drive & cone PVC 20” x 20” 1725 Direct Variable 1/3 (3 Ph) AS-14206 14” Poly cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP AirStorm 14” Fan AS-14EDDLP 18231 2,340 11.3 2,200 10.3 2,070 9.7 1890 8.8 18230* 2,100 9.5 1,990 8.9 1,860 8.4 1690 7.6 MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP *Performance shown with no cone AS-18EDDLP 18” w/o Cone PVC 25.5” x 26” 1725 Direct Variable 1/3 1 AS-18EDDLP-V 18” w/VFD drive w/o Cone PVC 25.5” x 26” 1725 Direct Variable 1/3 3 (3 Ph) AS-18EDDLP-L 18” w/o VFD drive & Cone PVC 25.5” x 26” 1725 Direct Variable 1/3 3 (3 Ph) AS-18206 18” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP PHASE AirStorm 18” Fan AS-18EDDLP 15684 4,980 11.7 4,780 11.0 4,580 10.3 4,350 9.7 15685* 4,490 10.0 4,310 9.5 4,120 9.0 3,920 8.5 AS-18EDDLP-V 18232 4,710 11.1 4,490 10.5 4,290 9.9 4,080 9.3 MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP *Performance shown with no cone Experience counts. We took 50 years of construction knowledge and applied it to designing ventilation fans that perform on our customer’s farms. Fiberglass fans manufactured from corrosion resistant components to withstand the harshest environments. Tested CFM ratings from production fans, the same ones we deliver to your farm. Fans built to excel in the real world of livestock production. WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
3 WWW.HOGSLAT.COM AS-24EDDLP 24” w/o cone PVC 34.5” x 34.5” 1075 Direct Variable 1/3 AS-24EDDLP-V 24”,w/VFD drive w/o cone PVC 34.5” x 34.5” 1100 Direct Variable 1/3 ( 3 Ph) AS-24EDDLP-L 24”,w/o VFD drive & cone PVC 34.5” x 34.5” 1100 Direct Variable 1/3 ( 3 Ph) AS-24206 24” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP AS-24EDDLP 17295 7,330 16.7 6,930 15.2 6,570 14.1 6,220 12.9 17298* 6,430 13.6 6,140 12.7 5,750 11.7 5,350 10.7 MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP *Performance shown with no cone A 115/230V 1/3 HP motor powers the AirStorm 14”, 18” and 24” fans. Stainless steel motor mounts and hardware furnish superior corrosion resistance. Motor-matched, composite fiberglass props outlast plastic or aluminum. Resin transfer fiberglass housings feature UV stabilizers to last in the harshest environmental conditions. White PVC shutters feature fulllength spring steel rods instead of plastic pins in the ends which lock into a heavy PVC frame with reinforced corners. True airfoil shutter vanes reduce air drag. *This shutter is included with the fan Shown with the optional discharge cone. Heavy-duty fan guards with baked on finish. Smooth interior and exterior are easier to wash. A high service factor 1/2 HP motor powers the AirStorm 36” fan. The high S.F. rating provides protection from motor failures caused by varying rural electrical voltage. Stainless steel motor mounts and hardware provide superior corrosion resistance. Motor-matched, composite props outlast plastic or aluminum. Resin transfer fiberglass housings feature UV stabilizers to last in the harshest environmental conditions. Heavy-duty fan guards with baked on finish. White PVC shutters feature full --length spring steel rods instead of plastic pins in the ends-- which lock into a heavy PVC frame with reinforced corners. True airfoil shutter vanes reduce air drag. *This shutter is included with the fan Shown with the optional discharge cone. Smooth interior and exterior are easier to wash. AS-36EDDLPA 36” w/o cone Plastic 43.5” x 43.5” 850 Direct Variable 1/2 AS-36206 36” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP AS-36EDDLP 15556 11,550 20.6 10,780 18.4 9,940 16.4 8,900 14.2 15557* 10,510 17.7 9,790 16.0 8,980 14.4 8,150 12.8 MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP *Performance shown with no cone AirStorm 24” Fan AirStorm 36” Fan WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
4 VENTILATION SYSTEMS AS-54XEBDLP 54”, w/o cone PVC 58” x 60.5” 1725 Belt Single 1-1/2 AS-54XEBDLP-V 54” w/VFD, w/o cone PVC 58” x 60.5” 1725 Belt Variable 1-1/2 (3 Ph) AS-54XEBDLP-HE High Efficiency Conversion Kit AS-54206 54” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP *Performance shown with no cone AS-54XEBDLP 17263 30,900 20.8 29,400 19.1 27,600 17.4 25,600 15.7 AS-54XEBDLP-HE 17265 28,500 23.2 26,700 20.9 24,400 18.6 21,700 16.1 AS-54XEBDLP 17264* 28,100 18.0 26,400 16.5 24,600 15.0 22,700 13.6 The 54" AirStorm X-Brace fan was designed putting an emphasis on using corrosion resistant materials to reduce maintenance costs and downtime, while also delivering improved CFM performance under standard operating static pressures in modern hog and poultry barns. The 54" X-Brace model fan is a through-wall mount design with a gel coated fiberglass housing, optional poly discharge cone and an improved plastic vane shutter. Fabricated with a heavy PVC frame, reinforced corners and a generous 1" flange. The PVC vanes feature a true airfoil pattern and spring steel rods extending the entire length of the shutter with unique lockdown ends. Flat Performance Curve The X-Brace fans feature a proprietary stainless steel prop configured for peak air delivery at typical operating static pressures. The fan prop delivers the most efficient CFM ratings between 0.05" and 0.15" W.C. static pressures. Efficient Drive System The 54" X-Brace fan is powered by a high service factor GrowerSELECT 1.5 HP motor. A self-adjusting tensioner automatically keeps the 1/2" link belt at the proper tightness for maximum efficiency. Improved Shaft Bearing Life New solid base bearing housing increases mounting stabillity, reducing vibration significantly. The new bearing also includes a double-lip FloBack seal to improve lubrication and add additional protection against contamination to reduce maintenance. Fan features Stainless Steel motor and bearing mounting plates. Rigid X-Brace Support The innovative new X-Brace support is constructed of aluminum tubing with blue epoxy coating and a triangle edge profile to reduce wind turbulence. The X-Brace design moves the fan brace anchor points to the corners of the fiberglass housing, providing maximum rigidity, and features rubber frame mounts to cushion the fiberglass fan housing from vibrations. The stainless steel motor and shaft bearing mount is secured to the X-brace with stainless steel hardware and provides a stable corrosion resistant platform for the 1.5 HP GrowerSELECT fan motor. Low Maintenance Shutter • Rugged Fiberglass Housing • Stainless Steel Fan Blade • PVC Interior Shutters AirStorm X-Brace 54” Fan AirStorm X-Brace 51” Fan AS-51XEBDLP 51” w/o cone PVC 55” X 55” 115/230 Belt Single 1-1/2 AS-51XEBDLP-V 51 w/o cone w/VFD PVC 55” X 55” 230/460 Belt Variable 1-1/2 AS-54206 51” Poly Cone MODEL DESCRIPTION SHUTTER ROUGH OPENING RPM DRIVE SPEED HP MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP AS-51XEBDLP 18216 27,400 17.6 26,100 16.5 24,600 15.1 22,900 13.7 • Heavy-Duty Poly Cone • High Service Factor Motors WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
5 WWW.HOGSLAT.COM The 57" AirStorm X-Brace fan was designed putting an emphasis on using corrosion resistant materials to reduce maintenance costs and downtime, while also delivering improved CFM performance under standard operating static pressures in modern hog and poultry barns. The 57" X-Brace model fan is a flush-wall mount design* with a gel coated black fiberglass housing, black poly discharge cone and corrosion resistant poly butterfly shutter. MODEL DESCRIPTION SHUTTER OPENING RPM DRIVE SPEED HP ROUGH AirStorm X-Brace 57” Fan Flat Performance Curve The X-Brace fans feature a proprietary stainless steel prop configured for peak air delivery at typical operating static pressures. The fan prop delivers the most efficient CFM ratings between 0.05" and 0.15" W.C. static pressures. Efficient Drive System The 57” X-Brace fan is powered by a high service factor GrowerSELECT 1.5 HP motor. A self-adjusting tensioner automatically keeps the 1/2” link belt at the proper tightness for maximum efficiency. Improved Shaft Bearing Life New solid base bearing housing increases mounting stabillity, reducing vibration significantly. The new bearing also includes a double-lip FloBack seal to improve lubrication and add additional protection against contamination to reduce maintenance. Fan features Stainless Steel motor and bearing mounting plates. Corrosion resistant poly dampers seal tight with magnetic closures and dual springs. An aluminum damper ring maintains maximum stability in any temperature extreme. The innovative new X-Brace support is constructed of aluminum tubing with blue epoxy coating and a triangle edge profile to reduce wind turbulence. The X-Brace design moves the fan brace anchor points to the corners of the fiberglass housing, providing maximum rigidity, and features rubber frame mounts to cushion the fiberglass fan housing from vibrations. The stainless steel motor and shaft bearing mount is secured to the X-brace with stainless steel hardware and provides a stable corrosion resistant platform for the 1.5 HP GrowerSELECT fan motor. Optional Mounting Kit Stainless steel kit adapts fan to a through-wall installation. Mounting kit can be installed either flush with the inside or outside of the building wall. Rigid X-Brace Support Poly Butterfly Shutter AS-57EBDBPA SS Blade & Hdwr. w/cone PVC 57” x 57” 1725 Belt Single 1-1/2 AS-57EBDBPA-V SS w/VFD drive & cone PVC 57” x 57” 1725 Belt Variable 2 (3 Ph) AS-57EBDBPGA Galv. Blade & Hdwr. w/cone PVC 57” x 57” 1725 Belt Single 1-1/2 AS-57EBDBPGA-V Galv w/VFD drive & cone PVC 57” x 57” 1725 Belt Variable 2 (3 Ph) AS-57EBDBPA-MV SS, Minimum Vent w/cone PVC 57” x 57” 1725 Belt Single 1-1/2 AS-57EBDBPGA-MV Galv, Minimum Vent w/cone PVC 57” x 57” 1725 Belt Single 1-1/2 AS-57EBDBP-HE High Efficiency Conversion Kit MODEL TEST CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT BESS 0.00” SP 0.05” SP .10” SP .15” SP AS-57EBDBPA 20379 33,400 26.6 31,500 23.6 29,400 20.9 26,500 17.9 AS-57EBDBP-HE 20378 30,600 31.1 28,800 27.5 25,900 23.2 22,900 19.5 AS-57EBDBPGA 20376 33,200 25.7 31,300 22.8 29,200 20.2 26,600 17.7 AS-57EBDBPG-HE 20377 30,600 30.5 28,600 26.9 26,200 23.3 23,000 19.5 AS-57EBDBPA-V HS-00709* 32,613 23.3 29,300 20.7 26,534 18.1 23,796 12.5 AS-57EBDBPGA-MV HSPCT-1107* 28,400 25.8 26,900 23.7 24,600 20.7 21,400 17.3 HSI Test CFM C/Watts CFM C/Watts CFM C/Watts CFM C/Watts AS-36EBDBPG HSPCT-01090 12,240 17.7 12,010 17.2 10,910 15.5 9,230 12.9 AS-36EBDBPG-HV HSPCT-01117 16,250 11.6 15,470 10.8 14,520 9.9 13,650 9.1 0.00” SP 0.05” SP 0.10” SP 0.15” SP AS-36EBDBPG Galv. Blade & Hdwr. w/cone PVC 43” x 43” 1725 Belt Single 1 AS-36EBDBPG-HV Galv. Blade & Hdwr. w/ cone - High Volume PVC 43” x 43” 1725 Belt Single 1-1/2 MODEL DESCRIPTION SHUTTER OPENING RPM DRIVE SPEED HP AirStorm 36” Panel Fan WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
6 VENTILATION SYSTEMS 24” Transition Hood with FasLock The FasLock slide kit mounts to the poly transition and securely attaches the fan to the face of the hood. • Constructed of UV resistant polypropylene. • Bottom opening 31” x 33” • Face opening 39” x 39” Stainless Steel Slide Bar holds top flange securely in place. Remove the slide bar and tip fan forward for maintenance or cleaning. ITEM# DESCRIPTION 628062PA 24” Poly Transition HSFLT-24A FasLock Mounting Kit Hog Fan Guards MODEL GUARD (PART) GUARD GUARD AS-24EDDLP N/A 8100410100 8100410200 AS-36EDDLP N/A 8100110100 8100110200 AS-54EBDLP Panel 8100280100 8100280200 (2) Wall Brackets 2020760100 2020760200 (2) Gate Rods 2020100100 2020100200 AS-57EBDBP Panel 8100470100 8100470200 (2) Wall Brackets 2020760100 2020760200 (2) Gate Rods 2020100100 2020100200 (PAINTED) (GALVANIZED) Stainless Steel Pit Transition Pit transition for 24” fan mounts on pit sidewall over suggested concrete opening of 43” x 19”. Reduces trash buildup in fan housing and allows use of discharge cone to increase fan delivery. Ships assembled. #7990240500 Wind Diverter Wind diverter mounts on fan discharge to prevent strong winds from reducing CFM output. Fiberglass construction with Stainless Steel brackets. Fits most fans. HSWD-14................................................. 14” HSWD-18................................................. 18” HSWD-24............................................... 24” HSWD-36............................................... 36” ITEM# DESCRIPTION HS9203 Motor/Drive Combo 1/3HP 1.0HP 1/3P 230V 50/60Hz VFD 1725RPM USED: AS-14EDD*/AS-18EDD* HS9204 Motor/Drive Combo 1/3HP 1.0HP 1/3P 230V 50/60Hz VFD 1100PM USED: AS-24EDD* HS9205 Motor/Drive Combo 1/2HP 1.0HP 1/3P 230V 50/60Hz VFD 875RPM USED: AS-36EDD* HS9206 Motor/Drive Combo 1.5HP 2.0HP 1/3P 230V 50/60Hz VFD 1725RPM USED: AS-51EBD*/AS-54XEBD*/WS-54PBD* HS9207 Motor/Drive Combo 2.0HP 2.0HP 1/3P 230V 50/60Hz VFD 1725RPM USED: AS-57EBD*/WS-F52B2A*/WS-54SBD* VFD Kits AS-24PTC 6500 14.7 6200 13.5 6000 12.6 5700 11.6 Model CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT 0.00” SP 0.05” SP .10” SP .15” SP *24” panel fan performance data #HS9001A.................1/3 Hp motor, 1100 rpm, 115/230v #HS900-24A.........24” fiberglass prop (req. transtorque) #AS902-24EC.............................................24” fan guard #HS903-1..................Transtorque, 1/2” w/ 7/8” bushing #101194-5.......................PVC Shutter 32-1/2” x 32-1/2” Replacement Parts 24” Pit Transition Fan Complete The Airstorm 24” pit transition fan incorporates a 24” panel fan, poly transition hood, and shutter into a single compact unit. Poly shutter slides in stainless steel channels for easy removal without tools. Rough opening is 22” x 30”. #HS24PTC.....................24” Pit transition fan complete
7 WWW.HOGSLAT.COM Circulation Fans • Wide spacing reduces the performance-robbing buildup of debris and feathers on the fan guard. • Complete with pre-wired 10’ cord for 115 volt. • Totally enclosed motor with built-in three (18”) or two (20” & 24”) speed control WS-18C3 18” Circulation Fan 2-Speed Airflow* 1730/1410/1120 Bess Test Number c19595 • AIR DELIVERY Motor size 1/5 Voltage 120 Speed 3 Amps .92/.73/.60 Rpm 1537/1244/955 Frequency (Hz) 60 Speed Controller Included: Manual 3-sp Cord Included: Yes, 120 V, pre-wired Cord Length: 10’ Mount Style: Ceiling/wall Mount Included: Pre-installed Guard Spacing (in): 2” Product Weight (lb): 16 • SPECS WS-20C2 20” Circulation Fan 2-Speed Airflow* 2070/1740 Bess Test Number c21037 • AIR DELIVERY Motor size 1/11 Voltage 120 Speed 2 Amps 1.07/.89 Rpm 1068/880 Frequency (Hz) 60 Speed Controller Included: Manual 2-sp Cord Included: Yes, 120 V, pre-wired Cord Length: 10’ Mount Style: Ceiling/wall Mount Included: Pre-installed Guard Spacing (in): 2” Product Weight (lb): 18 • SPECS WS- 24C2 24” Circulation Fan 2-Speed Airflow* 2720/2470 Bess Test Number c21038 • AIR DELIVERY Motor size 1/7 Voltage 120 Speed 2 Amps 1.25/1.15 Rpm 1072/961 Frequency (Hz) 60 Speed Controller Included: Manual 2-sp Inverter Compatible: No Cord Included: Yes, 120 V, pre-wired Cord Length: 10’ Mount Style: Ceiling/wall Mount Included: Pre-installed Guard Spacing (in): 2” Product Weight (lb): 24 • SPECS Stir Fans • Heavy galvanized ceiling mount bracket tilts to adjust airflow direction. • Totally enclosed variable speed motor pairs with most speed controls (sold separately) to vary air delivery. • 115/230 Volt motor. Pre-wired cord not included. WS-20CV 20” Stir Fan Variable Speed Airflow* (thrust cfm) 3370 Efficiency* (thrust cfm/W) 11.7 5xD Centerline Velocity (fpm) 1050 Bess Test Number c20186 • AIR DELIVERY Motor size 1/3 Hp Voltage 115/230 Speed Single/variable Amps 3.8/1.9 Rpm 1700 Speed Controller Included: No Cord Included: No Cord Length: N/A Mount Style: Ceiling Mount Included: Yes Guard Spacing (in): 1/2 Product Weight (lb): 36 • SPECS WS-24CV 24” Stir Fan Variable Speed Airflow* (thrust cfm) 5200 Efficiency* (thrust cfm/W) 12.1 5xD Centerline Velocity (fpm) 1190 Bess Test Number c20187 • AIR DELIVERY Motor size 1/2 Hp Voltage 115/230 Speed Single/variable Amps 4.8/2.4 Rpm 1725 Frequency (Hz) 60/50 Speed Controller Included: No Cord Included: No Cord Length: N/A Mount Style: Ceiling Mount Included: Yes Guard Spacing (in): 1/2 Product Weight (lb): 47 • SPECS WS-36CV 36” Stir Fan Variable Speed Airflow* (thrust cfm) 9800 Efficiency* (thrust cfm/W) 19 5xD Centerline Velocity (fpm) 1040 Bess Test Number c20248 • AIR DELIVERY Motor size 1/2 Hp Voltage 115/230 Speed Single/variable Amps 6.0/3.0 Rpm 825 Frequency (Hz) 60/50 Speed Controller Included: No Cord Included: No Cord Length: N/A Mount Style: Ceiling Mount Included: Yes Guard Spacing (in): 1/2 Product Weight (lb): 65 • SPECS WS-36BDD 36” Box Fan 1/2 850 9,950 21.7 WS-48BDD 48” Box Fan 1 850 16,900 19.0 ITEM# DESCRIPTION HP RPM CFM CFM/WATT THRUST THRUST The Windstorm™ 36” box fan provides outstanding performance at an affordable price. Galvanized steel housing with secure wire guard which is easily removed for service. Box Fans Shutter Mounting Kit for Box Fans Kit converts box fan for use as a wall mount exhaust fan. Kit includes: • 3) Galvanized mounting brackets • 17) Zinc screws • 1) PVC Shutter #WS-36411................................Includes 38” x 38” PVC shutter #WS-48411...............................Includes 52” x 52” PVC shutter WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
8 VENTILATION SYSTEMS #AS-36EDDLPA-ID......................................................36” Infinity Fan, plastic shutter, no cone #AS-36206..................................................................................................................36” poly cone Infinity fans utilize advanced motor technology to lower energy costs, improve speed control, and reduce maintenance. Hog Slat’s Infinity fan line incorporates advanced motor technology. Brushless DC motors utilize integrated electronics to convert AC power to DC, calculate the house controller signal, and control fan speed by regulating the power to the motor. Infinity fans have several significant advantages. 1) Precise variable speed output. Upon receiving a signal from the house controller, the motor microprocessor determines the correct speed for the desired ventilation rate. It continues to monitor the shaft RPMs and adjust the power inputs to maintain the right speed. Minimum ventilation rates are meet without using smaller, less efficient fans PERFORMANCE DATA 2) Reduced maintenance. The direct-drive motor eliminates shaft bearings, pulley, and belts: no more costly and time-consuming repairs and adjustments. 3) Lower energy costs. At full load, the Infinity motor is more efficient than conventional AC motors. The Infinity motor maintains its high efficiency even with lower fan speeds. HighPerformance 1100 15100 14.8 14700 13.9 14200 13.0 High Volume 950 13000 19.4 12300 17.8 11800 16.2 High Efficiency 800 10600 28.1 9700 24.2 8600 20.2 .05” SP* .10” SP* .15” SP* RPM CFM CFM/WATT CFM CFM/WATT CFM CFM/WATT Infinity 36” *Performance data from Hog Slat’s Test Chamber PERFORMANCE CURVE: .05” Static Pressure RPM 1106 900 780 650 515 CFM 15200 12300 10400 8200 5700 WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov • Roto-molded High-Density Polyethylene plastic housing resists cracking or breaking. • Stainless steel mountings • Corrosion resistance, composite fiberglass props • Low maintenance, airfoil style PVC shutters with full-length spring steel rods • Poly-coated wire guard • Heavy-duty, dual voltage, 60/50 Hz motors with a 2-year warranty The PolyStorm fan series combines premium components with our roto-molded High-Density Polyethylene housing. Corrosion resistance features include fiberglass props, PVC shutters, and stainless steel mountings. At the core of every PolyStorm fan are rugged dual voltage motors with an industry-leading, 2-year warranty. PolyStorm fans are an excellent choice for new ventilation systems or lower-cost replacement fans. PolyStorm Fans PS-14EDDLP 14” 18-1/4” X 18-1/4” 1725 115/208-230 Var 1/4 PS-18EDDLP 18” 22-1/4” X 22-1/4” 1725 115/208-230 Var 1/3 PS-24EDDLP 24” 28-1/4” X 28-1/4” 1140 115/208-230 Var 1/3 Model Description Rough Opening RPM Voltage Speed Motor Hp CFM C/Watts CFM C/Watts CFM C/Watts CFM C/Watts PS-14EDDLP 1741 8.8 1619 7.8 1338 6.6 1019 5.4 PS-18EDDLP 3520 8.1 3311 7.6 3094 7.1 2863 6.6 PS-24EDDLP 5597 9.0 5302 8.6 4975 8.0 4590 7.3 0.00” SP 0.05” SP 0.10” SP 0.15” SP
9 WWW.HOGSLAT.COM VFD Offers Improved Control of Variable Speed Fans Most power ventilated livestock facilities rely on some method of control input to reduce the amount of air exhausted during colder weather. The farm operator calculates the number of animals and their weight to determine minimum ventilation rates expressed as cubic feet per minute or cfm. The volume of air produced by a fan is directly related to its rpm or revolutions per minute. Reducing the operating speed also reduces the airflow the fan generates. The most common method of speed regulation utilizes a device called a triac to regulate the amount of voltage to the fan motor. Although voltage regulation allows for adjustable ventilation rates, there are several disadvantages. Reducing the voltage to a motor also increases the amp draw, which in turn increases operating temperatures and decreases efficiency. Reducing the voltage by 50% doesn’t typically translate to a 50% reduction in speed or air delivery. Since each brand of motor responds differently to voltage reduction, it can be difficult to know the exact ventilation rate a fan is delivering. It is generally advised not to operate voltageregulated fans at speeds below 40-50% of their maximum rpm to prevent the motor from overheating. Following this advice means using multiple smaller fans for minimum winter ventilation. Another method of speed control is Variable Frequency Drive or VFD. A fan controlled by VFD uses a three-phase, single speed motor. A VFD Controller receives a 0 to 10-volt signal from the house controller and sends a corresponding signal to the fan motor in frequency or hertz. Using hertz to control fan speed has a significant advantage over voltage control including less motor overheating and improved energy efficiency. The full range of a VFD fan varies from full delivery down to nearly zero. This lower cfm range permits a producer to replace several smaller minimum fans on existing facilities with a single, larger VFD fan also functioning as a tunnel fan in the summer.
10 VENTILATION SYSTEMS #HS9028KIT† 1/6 3300 115 15-0145 8” & 10” #HS9007 1/4 1725 115/230 15-0109 14” #HS9008 1/3 1725 115/230 15-0110 18” #HS9006A 1/3 1075 115/230 15-0105 24” #HS9009A 1/2 850 115/230 15-0116 36” Item# Hp RPM Voltage *AP OEM Part # Fan Size #HS9031† 1/6 3250 120/240 FM1038 9” #HS9003 1/8 1625 120/240 FM1010 14” #HS9002 1/3 1625 120/240 FM1009 18” #HS9001A 1/3 1075 120/240 FM1008 24” Item# Hp RPM Voltage *AP OEM Part # Fan Size #HS9005A 850 1/2 48 115/230 6.6/3.3 Direct Drive, 36” #HS9015D 1725 1/2 56 115/208-230 5.3/2.6-2.6 Belt Drive, 36” #HS9010C 1725 1 56 115/208-230 11.2/6.0-5.6 Belt Drive, 48”-50” #HS9000A 1725 1 56 115/208-230 8.6/4.9/4.3 Belt Drive, 48”-50” (High S.F. 1.4 Motor**) #HS9019C 1725 1-1/2 56 208-230 6.7-6.2 Belt Drive, 52”-54” #HS9014C 1725 1-1/2 56 115/208-230 10.8/5.4 Belt Drive, 52”-54” (High S.F. 1.5 Motor**) Item# RPM Hp Frame Voltage Amps Use †Single Speed • *Use of Original Equipment Manufacturer part numbers is for reference only. †Single Speed • *Use of Original Equipment Manufacturer part numbers is for reference only. Replacement Fan Motors for GrowerSELECT Air Storm and Airstream Performer Fans • Removable plastic motor cap protects internal capacitor and provides access to wiring terminals. • Water slinger protects moisture from being forced past the double bearings while fan is operating. • Full 56 Frame motors with 5/8” interior shaft and double sealed ball bearings. • You don’t have to sacrifice performance to save money! Replacement Motors for Munters / Aerotech Fans Single Speed Fan Motors • TEAO motors • Permanently lubricated ball bearing • Dual start/run capacitors • 5/8” Shaft • Auto Overload GrowerSELECT offers a complete line of single speed and variable speed electric fan motors that are used to power our AirStorm and WindStorm fans. We specify performance standards and source our motors from the manufacturer which allows us to pass the savings on to you. Rest easy knowing that all GrowerSELECT motors are covered by an industry leading 2 year warranty! Fan Motors
11 WWW.HOGSLAT.COM ITEM# DESCRIPTION Our aluminum load block rides on a durable acetal load nut that provides superior wear resistance while decreasing friction and minimizing issues common with traditional metal/nylon drive blocks. Acetal guide blocks are also attached to the load block and ride against both cabinet sides to stabilize the screw shaft and provide consistent alignment during operation. ITEM# DESCRIPTION HS583E-2415 24” travel, 15 RPM, cable system HS583E-2415S 24” travel, 15 RPM, sprocket drive HS583E-2430 24” travel, 30 RPM, cable system HS583E-2460 24” travel, 60 RPM, cable drive HS583E-2430S 24” travel, 15 RPM, sprocket drive HS583E-3615 36” travel, 15 RPM, cable system Three sealed ball-bearing head pulleys mounted at the top of the machine provide multiple mounting options to fit a variety of control needs in poultry and swine buildings. The farm-duty ACME screw efficiently transfers power to the load block and optional chain and sprocket drive eliminates cable breakage. Multiple motor options reliably meet the needs of any operation. • Sprocket models feature a 13-tooth sprocket wheel and a 50-5/8” sprocket chain • Four set screws on the load block allow quick cable connections • 24”, 36” and 48” length options fit in a variety of wall and ceiling locations • Available in 120V or 240V motors with 15, 30 and 60 RPM capabilities • Quickly and easily manually adjust curtain and vent positions using the local controls • Backup secondary limit switches “lock-out” the machine when triggered until manually reset to prevent expensive equipment damage • All machines include an auxiliary switch that can be used to control certain fans during operation of curtains or vents to reduce strain on machine • Water resistant electrical enclosure protects all electrical switches and connections from moisture and corrosive environments Features a removable front cover providing complete access to the inside of the machine. The easy to hang cabinet is constructed with precision cut outs and swivel points that allow the ACME screw and load block assembly to be easily removed. The superior performance of an acetal load nut offers peace of mind if maintenance tasks fall behind during busy times of the year. Accurately control curtains, inlets and tunnel doors with the GrowerSELECT Curtain Machine. Innovative features such as easy mounting, simple servicing, localized control, double limit switches and more will help you keep up and running with more money in your pocket. Smooth Operation Versatility Smart Design Easy Servicing Curtain Machine HS583E-3630 36” travel, 30 RPM, cable system HS583E-3660 36” travel, 60 RPM, cable system HS583E-3630S 36” travel, 30 RPM, sprocket drive HS583E-4830 48” travel, 30 RPM, cable system HS583E-4860 48” travel, 60 RPM, cable system HS583E-4830S 48” travel, 30 RPM, sprocket drive
12 VENTILATION SYSTEMS • High quality motor bearings. • IP65 Rating. • Bi-directional control with potentiometer feedback for position sensing of inlets. • Equipped with an adjustable limit switch. 120V AC @ 60 Hz, 1.4 A, 167W Position Sensor: 10K ohm potentiometer ELECTRICAL SPECIFICATIONS Max Load: 350 kgs./772 lbs. Stroke Length: 610 mm./24” Max Speed: HS667 6.3mm, 1/4”/sec @ 60Hz or 5.4mm, 7/32”/sec @ 50 Hz. HS667B 2.0mm, 5/64”/sec @ 60Hz or 1.7mm, 1/16”/second @ 50 Hz. MECHANICAL SPECIFICATIONS HS653 Negative Pressure Vent Controller Pressure reading drops below this limit, the vent machine CLOSES vents to raise the pressure inside. Area between limit pointers, no adjustments are made. Pressure reading exceeds this limit, the vent machine OPENS vents to lower the pressure inside. Low Pressure setting adjustment knob. Clockwise to raise limit, Counter clockwise to lower limit. High Pressure setting adjustment knob. Clockwise to raise limit, Counter clockwise to lower limit. Manual OPEN/CLOSE AUTO/MANUAL Selection Mounting kit for the Hog Slat® linear actuator #HS667-01KIT Kit contains a stainless steel mounting bracket, threaded mounting holes and the required hardware to attach the actuator. Pre-drilled mounting holes on the edges of the bracket offer multiple areas to securely attach this unit inside your barn. Optimum IP65 Rating Hog Slat’s Linear Actuator has a superior seal to prevent water intrusion and prevent internal corrosion. The HS667-24 is better sealed around the motor and end cap, plus offers clamped boots over the ends of the extension tube to further seal the unit. Other actuators on the market are rated IP53 Hog Slat’s HS5667-24 actuator is rated IP65 Protection against entry of dust in sufficient quantity to interfere with satisfactory operation of equipment. Protection against spraying water at up to 60 feet from the vertical. Complete protection against entry of dust. Protection against low pressure jets of water from all practicable directions. 5 6 3 5 30o ITEM# DESCRIPTION HS667-24 120 Volt, Blue HS667-24-240 240 Volt, Blue HS667B-24 120 Volt, Black Hog Slat® Linear Actuator The Hog Slat® Linear Actuator features an IP65 rating and powerful precision for all stages of ventilation. Designed to be used with an automatic ventilation control. This unit provides bi-directional control with potentiometer feedback for position sensing. Can be mounted with optional Hog Slat® Linear Actuator Mounting Kit. HS667-24 LINEAR ACTUATOR HS667B-24 LINEAR ACTUATOR WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
13 WWW.HOGSLAT.COM Lower installation cost. Reduced maintenance expense. Improved production. SYSTEMS Cools incoming air to reduce heat stress in buildings. Large capacity spray bar features bell end to eliminate 5” dead spots common with coupled pipe. Spray Bar The system is fed by a trouble-free Jet or Submersible pump. Trouble-Free Pump Aluminum open-top system allows for easy inspection of the spray bar. The top is secured with rust resistant brass inserts for easy removal. Easy Inspection 1.7 gallons linear foot 2.1 gallons linear foot Your choice of Jet Pump or Submersible Pump with Sump Tank. Sump or Jet Pump Large square poly trough offers greater drainage capacity and allows trough to sit directly on concrete foundation with or without brackets. Square poly trough cover increases drainage area by 33% allowing water to recycle quicker extending pad life. Improved Drainage 4” Wide Brackets prevent damage to trough and double leg supports eliminate twisting and sagging. Stronger Brackets Square trough increases water reservoir by over 24% over the round trough. Greater Trough Capacity Coated with ProTec to protect against UV and mechanical damage. Heavy H2-XCELL Pad The single point pad retainer allows complete wetting of the pad top unlike competitive systems when as much as the top 3” remains dry. Less Pad Streaking
14 VENTILATION SYSTEMS ITEM# DESCRIPTION #H2P-115S 1/2 Hp Submersible Pump, 115 V #H2P-230S 1/2 Hp Submersible Pump, 230 V Submersible Cool Cell Pump Pumps typically used for cool cell systems are adapted from other industries; waste water, sump pumps, etc. They are designed with a higher head pressure and low volume to lift water as high as 35’. We went to one of America’s leading pump manufacturers with a request to build a pump specifically designed for cool cell systems. The submersible pump features a re-designed VORTEX IMPELLER resulting in a unit with a LOWER HEAD PRESSURE with HIGHER VOLUME. This combination allows our pump to service a longer cool cell run. Operating Range of Evaporative Cool Cell Systems at noted lengths LSP0711 (3/4HP) - 115V LSP0712 (3/4HP) - 230V Avg. Annual Operating cost: $97 * FLOW RATE (GALLONS PER MINUTE) TOTAL HEAD (FT) H2P-115S (1/2HP) - 115V H2P-230S (1/2 HP) - 230V Avg. Annual Operating cost: $75 * * Avg. Annual Operating cost based on the following: 100 days per year use 12 hours per day operation $.10/Kwh energy cost 10 15 20 25 30 35 40 0 10 20 30 40 50 60 70 80 90 100 40FT 60FT 80FT The special impeller allows the use of a 1/2 Hp motor instead of a 3/4 Hp motor. Electrical usage is decreased by up to 25%. GET 3/4 HP PERFORMANCE FROM A 1/2 HP PUMP Rugged Features for a Long Lasting Pump: • Oil-filled motor • Epoxy coated, cast iron housing • 2” discharge with 1-1/2” bushing to adapt to most systems • 2” bottom suction inlet • 15’ waterproof power cord • Silicon carbide seal • 115 / 230 Volt- 5.5/2/7 amps • 15.87” high x 9.5” wide *These pumps are only for 10” or larger reservoirs and will not work in 8” sump tanks. Jet Pump The Compact Jet Pump delivers outstanding performance. Efficient design minimizes friction and turbulence reducing power consumption. Self-priming pump design protects internal components from wear. Strainer basket features a Transparent Lid for easy inspection. Larger capacity extends time between clean out. Easy access drain plug for service and winterizing. Features Include: • Available as 120 or 240 volt models • Includes 9 foot power cord • 1-1/2” discharge pipe • Open drip proof motor FLOW RATE (GALLONS PER MINUTE) TOTAL HEAD (FT) 10 20 30 40 50 60 70 0 20 40 60 80 100 120 140 H2H-120J H2H-240J ITEM# DESCRIPTION #H2P-120JA 3/4 Hp Jet Pump, 120 V #H2P-240J 3/4 Hp Jet Pump, 240 V Extension Kit for Round Pipe Cool Cell Systems 10’ Add-on Kit for Round Style 8” Trough Evaporative Cooling System Includes trough, cover, sprayer, deflector, pad retainer and 8” trough. Does not include pad or end panel. ITEM# DESCRIPTION #HSES-RA10 Extension Kit WARNING: This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov WARNING: *This product can expose you to chemicals, including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
15 WWW.HOGSLAT.COM 100% Virgin Kraft Paper Offers a structurally sound paper with great absorbency for maximum cooling efficiency. 2 Foot Width Offered exclusively in 2 foot widths providing a strong pad, while reducing the number of pad seams. 3/4” ProTec Edging Reinforces the pad face to prevent against damage from UV light, severe outdoor weather and mechanical cleaning processes. ProTec edging also prevents algae and mineral deposit build-up to help increase pad life. Built for the Extreme Cooling animals in the deep summer means battling extreme conditions. You need a replacement pad that can handle the extremes. H2-XCELL pad delivers. Maintenance Although the H2-XCELL pads have been designed for the harshest of conditions and the most demanding applications proper maintence is still required to achieve maximum life of the evaportaive pads. This includes but is not limited to allowing the pads to completely dry out once per 24 hour period, routine flushing of the system, and ensuring pads are not resting in standing water. 2’
16 VENTILATION SYSTEMS Airflow Performance Data (CFM) 1 300 450 500 550 2 650 950 1050 1150 3 950 1350 1550 1700 5 1400 1950 2200 2400 6 1750 2450 2750 3050 8 1950 2750 3100 3400 Fully Open 2250 3250 3600 3950 0.05 0.1 0.125 0.15 Static Pressure (In, H20) Opening Width (In) #HSIN3000C-I Provides accurate control of incoming to direct it across ceiling to reduce drafts at floor level. Insulated Actuated Bifold Inlets Side Entry Cleat Allows for fast and easy adjustment of the rope. Cleat retains the rope securely when adjustment is not necessary. Latch Mount and Cable Guide Side mounted latch does not get blocked while opening by ceiling obstructions. Latch shuts the inlet tightly and securely. Combination piece also serves as a guide for the rope that helps open/close the inlet. High-Strength, LowStretch Rope Premium strength Lift-All Treated Poly rope with a vectran core minimizes stretching rope. P seal made of EDPM located in the middle of the inlet between the top of the door and the frame. Reduces cold air leaking out of center. Tongue & groove interference seal profile runs along the edge of the door and frame to ensure that the inlet shuts completely with no gaps between the door and the frame. Two Eye Bolts Easily mount the inlet to the ceiling in either orientation. Brush seal is used for additional protection. Rough opening: 25” x 27-1/2” Airflow Performance Data (CFM) 1 600 850 1050 1250 2 1150 1650 2050 2400 5 2350 3350 4000 4300 6 2850 4050 5000 5750 8 3200 4500 5500 6350 Fully Open 3750 5350 6550 7600 0.05 0.1 0.15 0.2 Static Pressure (In, H20) Opening Width (In) #HSIN4900C-I Rough opening: 24-1/2” x 46-1/2”
17 WWW.HOGSLAT.COM A traditional gravity-flow 4-way ceiling inlet helps mix incoming air in the barn to maintain comfortable temperatures inside. • Helps pull warmer air from the attic during winter to help reduce heating costs • Heavy-duty PVC mounting frame includes 18” attic inlet sleeve and 1” insulation board • Delivers 1700 CFM @ 0.10 SP | Minimum 500 CFM @ 0.05 SP • Rough Opening Dimensions: 27-7/8” x 27-7/8” • Item # HSI2000 • Durable fiberglass housing with foam filled plastic baffle • Installs in farrowing room walls to allow regulated air flow from temperature controlled hallways into each room • Adjustable steel weight provides quick manual adjustment of incoming air flow and static pressure • Rated for 3,000 CFM @ 0.10 SP • Item # 62990 Hog Slat Single Wall Air Inlet Durable fiberglass and corrosion resistant aluminum frame chimney is easily installed in naturally ventilated swine buildings. • Features an actuated baffle that can be controlled by a vent machine to adjust exhaust or incoming airflow • Damper hardware and roof flashing kit for installation included • Dimensions: 25-1/4”L x 25-1/4”W x 66”H • Item # 8140201900 Natural Ventilation Barn Chimney Hog Slat 4-Way Ceiling Inlet
18 VENTILATION SYSTEMS The HS730 SERIES Stage Manager Controller provides intermediate control between an environmental control system and accessories such as fans, pumps, heaters etc… With each accessory connected to individual stages within the Stage Manager, the operator is able to manually operate the accessories ON or OFF independent of the environmental controller. The HS730 Stage Manager relay cards provide isolation between the control signal and the load or accessory, allowing a 120VAC control signal to operate a 240VAC motor as example. Stage switch controls are located on the front panel with control signal indicator and write on labels to fully customize controller layout and stage identification. Relay PCB Control Signal: 120VAC @ 60Hz, single phase. Output: Relay DPST Contact maximum rating 15 Amp, 2HP @ 240VAC Switch Control DPDT Toggle switch Max. Ratings: 15A @ 250 / 277VAC 1 ½ HP @ 125 VAC 2 HP @ 250 VAC Electrical Rating Stage Manager HS730-66 HS730-88 Control 8 Relays HS730-2S4R Control 2 Switches & 4 Relays HS730-66 Control 6 Relays HS730-1212 Control 12 Relays
19 WWW.HOGSLAT.COM Controls and Monitoring Choose Hog Slat® timers, thermostats and controls to help manage your ventilation fans, heaters and other duty cycle equipment in swine and poultry facilities. The Hog Slat electromechanical thermostat is available in two wiring options and models designed for different environmental conditions. Hog Slat® Thermostats The Hog Slat adjustable duty cycle timer is a high quality 30 minute timer with individual control knobs to set run time and interval length. NEMA Type 4 enclosure screw mounts from the inside of the case and is designed to withstand poultry and swine production building environments. • Perfect for controlling short run-time duration tasks like fogging, soaking, minimum ventilation fans and lighting • Max “On” Time: 15 minutes & 30 seconds | Min “Off” Time: 30 seconds • “Hold” feature allows user to override timer and manually control load • Two wiring knock-outs on the top of the enclosure and one knockout on the bottom • 20V/240V | Normally Open | 20A | SPDT Hog Slat® Duty Cycle Timer Hog Slat® 2 Hour Spray-proof Timer Easily control drip systems in sow housing with the Hog Slat drip system control board. The drip control is managed by a Hog Slat single stage thermostat and Hog Slat 30 minute duty cycle timer. • The HS728 model drip system control features a 24 hour timer, providing an additional layer of control to the drip system functions. The HS729 control includes all the standard features, minus the 24 hour timer • Plumbing includes a 1” electronic solenoid valve, 3/4” water filter and 15 PSI pressure reducer • All electrical components are pre-wired with liquid-tight nylon connectors • All components are securely mounted to a 1/2” thick block of durable polyboard that is easily cleaned during wash-down Hardwired Hog Slat hardwired thermostats are designed to be permanently wired in buildings or rooms to control fans, heating or cooling equipment in a single area. Thermostat is available with Hog Slat or Georgia Poultry Equipment logos. •Single & Dual stage models available •Wiring knock-outs on each side and top of the enclosure •NEMA 4x rated NEC 547 compliant and splashproof models available depending on mounting location needs •30°F – 110°F temperature range •120V SPDT Pre-wired Hog Slat pre-wired thermostats feature a 20’ 3-prong cord designed to control fans, heating or cooling equipment in a single area. The pre-wired plug provides increased portability, temporary temperature based control or a quick backup option in the event of a hardwired thermostat failure. •Single stage • Wiring knock-outs on each side and top of the enclosure •NEMA 4x rated NEC 547 compliant and splashproof models available depending on mounting location needs •30°F – 110°F temperature range •120V SPDT
1-800-949-4647 | www.hogslat.com | World Leader in Swine Production Solutions *Updated 01/2024
hogslat.comRkJQdWJsaXNoZXIy MTA3MzU=