GrowerSELECT - HSGR Series Auger Gearhead Parts Specification

Hog Slat Inc. Newton Grove, NC USA December 2018 6 Grow-Flex ™ Feed System Pinion Specifications Pinion Motor Shaft Size Gear Head HSP01 1/2” HSGR003, HSGR004, HSGR009, HSGR011, HSGR012, HSGR014 HSP02 5/8” HSGR003, HSGR004, HSGR009, HSGR011, HSGR012, HSGR014 HSP03 1/2” HSGR001, HSGR002, HSGR006,HSGR007,HSGR008 HSP04 5/8” HSGR001, HSGR002, HSGR006,HSGR007,HSGR008 HSP05 1/2” HSGR005, HSGR016 HSP06 1/2” Used in GSI & BD HSP07 5/8” Used in GSI & BD HSP08 5/8” Used in GSI HSP09 1/2” Used in BD HSP03 HSP04 HSP05 Gearbox Set-up The Gearbox is preassembled to motor for the more conventional application with the output shaft at top configuration. If the specific application requires: the gearbox can be rotated 180° so that shaft is at bottom. Make sure the solid Hex Plug is always on bottom of Gearbox and Vent Plug is on top of Gearbox . Gearbox must be filled with correct amount of specified 80-W90 Gear Oil prior to running system. Please see label on Gear Box for details. A bottle of GrowerSELECT oil, ( Part Number HS745 ) is supplied with Drive Unit. Note: Failure to fill Gear Box with proper amount of Gear Oil or failure to use proper Type of Gear Oil can result in premature unit failure After filling Gearbox with proper type and amount of gear oil, vent plug should be assembled to the top of Gearbox.