Hog Slat Inc. Newton Grove, NC USA June 2023 15 Air Storm Fans 16. Drill a ¼” hole at the 12 o’clock position in the cone assembly at the butterfly ring to the exit side of the fan. Then insert end of supplied stainless steel cable through hole at the 12 o’clock position just before the butterfly, secure end above cone with supplied cable clamp. 17. Insert grill guard into cone and secure each connection with a 5/16”-18 X 1” hex bolt, (2) 5/16” flat washers, and a 5/16”-18 serrated flange nut from hardware bag number 13. Leave Top and Bottom connection open at this time.
RkJQdWJsaXNoZXIy MTA3MzU=