GrowerSELECT - AirStorm AS-36 Series Installation Manual

Hog Slat Inc. Newton Grove, NC USA June 2023 7 Air Storm Fans Assembly 1. Remove packaging from fan and cone if applicable. • Locate hardware kit(s) and supplied literature and store for later use. • Ensure not to damage the fan or components during this step. Cut a Treated Lumber 2”x4” to 46” Length. Attach to the exterior of the building with the top of the 2’x4” 23 Inches above the center of the rough opening, and centered below the rough opening horizontally. Provided treated lumber is used the 2”x4” may be left in place after operation, alternatively after all lag bolts are installed the 2”x4” may be removed.

RkJQdWJsaXNoZXIy MTA3MzU=