Hog Slat Inc. Newton Grove, NC USA August 2019 10 Air Storm Fans 7 From the interior of the house, use WS-001 Hardware package contents to secure the shutter to the fan inlet opening. Place shutter into fan inlet opening. Ensure shutter is oriented so shutter will swing upward when air flows from the interior of the house through the fan to the exterior of the house. PRE DRILLED HOLES ARE PROVIDED IN THE HOUSING FOR THE BOTTOM 2 RETAINER CLIPS TO ENSURE SHUTTER IS CENTERED. EACH PRE DRILLED HOLE IS ACCOMPANIED BY A DECAL NOTING HOLE DESIGN FUNCTION. 8 Attach (8) shutter retainer clips with aluminum washer and self-tapping screw to fan housing. Space the retainer clips evenly between securing screws applied in step 2. THIS COMPLETES THE HOUSING ASSEMBLY OF THE FAN
RkJQdWJsaXNoZXIy MTA3MzU=