Hog Slat Inc. Newton Grove, NC USA December 2022 11 Air Storm Fans Assemble cone. This step requires (2) installers. Begin by placing one cone panel on the ground with the end with connection slots slightly elevated. Insert the connection tabs into the connection slots and rotate to parallel. Continue for all 4 panels. Connect cone panels to form round shape. This step requires (2) installers. Stand the cone upright with the larger diameter on the ground and force the cone to bend to allow the final connection tabs to insert into the remaining connection slots. Secure round connections with 5/16”-18 X 3/4” hex bolts, 5/16” flat washers, and 5/16”-18 serrated nuts leaving the slots closet to the larger diameter open at this time. A washer should be used on the inside and outside of each connection. BOLT HEADS SHOULD BE ON THE OUTSIDE OF THE CONE!
RkJQdWJsaXNoZXIy MTA3MzU=