Hog Slat Inc. Newton Grove, NC USA December 2022 12 Air Storm Fans Using 2 people lift the cone and butterfly assembly and slide OVER THE BUTTERFLY BUT UNDER THE MOUNTING BRACKET! Push onto the assembly until slots bottom out on the mounting bolts. Twist cone to lock into place then completely tighten lock nuts to secure. Drill a ¼” hole at the 12 o’clock position in the cone assembly at the butterfly ring to the exit side of the fan. Then insert end of supplied stainless steel cable through hole at the 12 o’clock position just before the butterfly, secure end above cone with supplied cable clamp.
RkJQdWJsaXNoZXIy MTA3MzU=