Hog Slat Inc. Newton Grove, NC USA August 2022 15 Air Storm Fans Drill a ¼” hole at the 12 o’clock position in the cone assembly at the butterfly ring to the exit side of the fan. Then insert end of supplied stainless steel cable through hole at the 12 o’clock position just before the butterfly, secure end above cone with supplied cable clamp. 16. Using (4) of the supplied zip ties, secure the two exit guards together to form a circular cone guard. Put one zip tie at the very top and one at the very bottom of the guard. Evenly space two additional zip ties. 17. Insert grill guard into cone and secure each connection with a 5/16”-18 X 1” hex bolt, (2) 5/16” flat washers, and a 5/16”-18 serrated flange nut from hardware bag number 13. Leave Top and Bottom connection open at this time.
RkJQdWJsaXNoZXIy MTA3MzU=