Hog Slat Inc. Newton Grove, NC USA August 2022 16 Air Storm Fans Use hardware form bag 17 for the top and bottom connection of the fan exit guard. Pull stainless steel cable until tight and having it exit at the 6 o’clock position of the cone. Wrap stainless steel cable around bolt twice and tighten to secure. Cable should be tight but should not be applying force to the assembly. This step is optional. If an on center spacing distance of 72” or greater was chosen move to page 13. In the event on center spacing of less than 72” was chosen cone panels can be deformed and bolted to each other provide uniform airflow and to eliminate opposing vibration. Exit guards should be modified accordingly to still provide maximum protection.
RkJQdWJsaXNoZXIy MTA3MzU=