Hog Slat Inc. Newton Grove, NC USA August 2021 30 Grow-FlexTM Feed System HS529 Hopper Level Control Part List · Wiring · Installation Overview: The HS529 Hopper Level Control is a universal control intended to be used with any conveying system that carries free-flowing feed. The control will automatically start or stop the fill system as the feed level pressure against the paddle assembly changes. Controls may be used in more than one hopper to ensure that no hopper runs out of feed before the control unit hopper requires feed. In applications where more than one control unit is used, the Control Units must be wired in Parallel so that any unit can start the system. The HS529 is suitable for use in both Poultry and Hog applications. Poultry Applications Hopper Level Control installed in the end or in last hopper of Delivery System should be installed Low.
RkJQdWJsaXNoZXIy MTA3MzU=