Hog Slat Inc. Newton Grove, NC USA August 2021 36 Grow-FlexTM Feed System Gearhead Specifications Chart The chart below provides Gearhead specification information for the various GrowerSelect applications (fill systems, feeders, etc). Gearhead Output Shaft Size Motor Hz Motor RPM Output RPM Primary Applications HSGR001 5/8 60 1725 352 M55 & Poultry HSGR002 7/8 60 1725 352 M75, M90, M125 HSGR005 7/8 60 1725 216 Power Winch HSGR006 7/8 60 1725 441 M75, M90, M125 HSGR006 7/8 50 1425 364 M75, M90, M125, Primarily used in Europe 50 Hz HSGR007 5/8 60 1725 441 M55 & Poultry HSGR007 5/8 50 1425 364 M55 & Poultry, Primarily used in Europe 50 Hz HSGR008 7/8 60 1725 256 M75, Chain Disk, & Extension System HSGR008 7/8 50 1425 213 M75, Chain Disk, & Extension System, Primarily used in Europe 50Hz HSGR010 5/8 60 1725 693 Poultry High Speed Drive Units HSGR010 5/8 50 1475 573 M75, Chain Disk, & Extension System, Primarily used in Europe 50Hz HSGR015 5/8 60 1725 256 M55 & Poultry HSGR017 7/8 60 1725 156 M75, M90 Chain Disk Fill System
RkJQdWJsaXNoZXIy MTA3MzU=