GrowerSelect GROW FLEX Auger Feed System Installation Operation Manual Addendum

Hog Slat Inc. Newton Grove, NC USA August 2018 Grow-Flex TM Feed System Pinion Specifications Pinion Motor Shaft Size Gear Head HSP03 1/2” HSGR001, HSGR002, HSGR006,HSGR007,HSGR008, HSGR010, HSGR015, HSGR017 HSP04 5/8” HSGR001, HSGR002, HSGR006,HSGR007,HSGR008, HSGR010, HSGR015, HSGR017 HSP05 1/2” HSGR005 HSP03 HSP04 HSP05 Gearbox Set-up The Gearbox is preassembled to motor for the more conventional application with the output shaft at top configuration. If the specific application requires: the gearbox can be rotated 180° so that shaft is at bottom. Make sure the solid Hex Plug is always on bottom of Gearbox and Vent Plug is on top of Gearbox . Gearbox must be filled with correct amount of specified 80-W90 Gear Oil prior to running system. Please refer to “Maintenance of the Grow-Flex System” on page 70 for details. A bottle of GrowerSELECT oil, ( Part Number HS450 ) is supplied with Drive Unit. It is also available for separate sale at any Hog Slat or Georgia Poultry Retail Store; and on-line. Note: Failure to fill Gear Box with proper amount of Gear Oil or failure to use proper Type of Gear Oil can result in premature unit failure. After filling Gearbox with proper type and amount of gear oil, vent plug should be assembled to the top of Gearbox. Replaces Page 38