GrowerSELECT - HS583 Potentiometer Kit Installation Manual

Hog Slat Inc. Newton Grove, NC USA July 2019 REV A3 1 Ventilation Systems HS583 POTENTIOMETER KIT ASSEMBLY FOR GROWERSELECT CURTAIN MACHINES (Includes Spanish Version - Incluye versión en español) General Installation Notes: Make sure that power is disconnected from system prior to servicing. Installation of this equipment and related OEM equipment should be in accordance with these instructions, OEM’s installation instructions and local codes (if applicable). Failure to follow specified instructions may cause damage to equipment and/or personal injury or death. Take special note of any Warnings or Safety Decals on the equipment and in manuals. Always wear protective clothing and any applicable Personal Protective Equipment (Safety Glasses and/or Ear Plugs) when working with the equipment. Discarded materials, equipment and boxes should be recycled in accordance with local and national codes. Note: Assembly is to be wired in accordance with all applicable local and national electrical wiring codes. All wiring sizes and fuse capacities are to be sized according to applicable electrical code specifications or other regulations. Safety Instructions: Read all safety messages in this manual and on equipment safety decals. Follow recommended precautions and safe operating practices. Ground all electrical equipment for safety. Ground all non-current carrying metal parts to guard against electrical shock. Always keep safety decals in good condition and replace missing or damaged decals. Overview: The HS583 Potentiometer kit assembly is used to provide a resistance value based on the positioning of Hog Slat HS583 series curtain machine load block. Specifications: Resistance range: 0 – 10K Ohms +/- 5%, 10 turns Maximum Voltage: 141 V Maximum Power: 2W HS583-POT-1IN FOR 24” MACHINES HS583-POT-2IN FOR 36-48” MACHINES