Hog Slat Inc. Newton Grove, NC USA September 2018 2 Ventilation System 5. Loosen Allen head set-screw at the limit screw until the slide block is free from the limit rod. 6. Disconnect motor and slide limit switch assembly, toggle switch assembly, and end cap out the end of the housing. All components will be tied together by the wiring harness. 7. Carefully cut out supplied template HSART-430 along noted dashed lines. Fold template along “Fold Line” taking care to make the fold crease along the indicate line close as possible. Fold Line
RkJQdWJsaXNoZXIy MTA3MzU=