Hog Slat Inc. Newton Grove, NC USA September 2018 4 Ventilation System 10. Align HS583E-46 enclosure with end of housing as shown. Insert limit rod into rubber bellows and slowly slide limit switch enclosure into end of machine housing. Align limit rod with limit switch slide block. Continue to slide HS583E-46 enclosure into housing. DO NOT FORCE. 11. HS583E-46 is in place when mounting holes in plastic enclosure are aligned with newly drilled holes in machine housing. 12. Install (2) (item#2, 616551 screws) through machine housing from outside into and through plastic enclosure as shown. Install (2) (item#3, 8CNNMZ lock nuts) . Tighten securely. HS583-46 Enclosure Limit Rod
RkJQdWJsaXNoZXIy MTA3MzU=