GrowerSELECT - HS583E-46KIT Enclosed Switch Assembly Retrofit Kit Installation Manual

Hog Slat Inc. Newton Grove, NC USA September 2018 5 Ventilation System 13. Set limit switch slide block in the middle of the switch (center of travel range). Tighten Allen head setscrew securely to 30 in-lbs minimum. When using loose “L” shaped Allen wrench. Grasp near end of wrench and tighten until wrench flexes. 14. Install (item # 7, HS583-3SW) into the end of machine housing as shown until flush with machine housing. Secure using (4) (item#4, 9705090500 screws) using 5/16” drill driver or socket. Center HS583-3SW

RkJQdWJsaXNoZXIy MTA3MzU=