Hog Slat Inc. Newton Grove, NC USA September 2018 6 Ventilation System 15. Locate loose green wire found near top of enclosure on the toggle switch side. Attach ring terminal to machine housing using (1) (item#5, 10F37MXPZ screw) and (1) (item#6, 606804 KEPS nut). Tighten securely. 16. Re-connect motor and incoming wiring to terminal strip. Route wires through provided liquid tight connectors. Tighten liquid tight connectors around cable sleeve once wires are installed.
RkJQdWJsaXNoZXIy MTA3MzU=