Hog Slat Inc. Newton Grove, NC USA February 2022 REV A11 21 Ventilation Systems INSTALLATION OF HS583-100 SIDE COVERS 1. Determine how cables/chains will exit the machine. a. If the cables/chains exit on each side of the machine, cut off the lower rectangular protrusion on each side cover using a hack saw, reciprocating saw or similar tool. This will reveal a rectangular opening for the cable/chain to exit. See Figure 2&3 b. If both cables/chains exit on the same side then cut both protrusions on (1) side cover only. The untouched side cover will be used to cover up the non-used side of the machine. See Figure 4 Figure 2 Figure 3 Figure 4 Saw Blade Figure 1
RkJQdWJsaXNoZXIy MTA3MzU=