Hog Slat Inc. Newton Grove, NC USA February 2019 18 Ventilation System S. Pull shaft out of Thrust bearing plate. 5.2 Installation of Drive Screw A. Install drive screw in reverse order of removal. B. Re-connect power. Section 6: Thrust Bearing Replacement Tools Required: 7/16" socket/wrench 6.1 Removal of Thrust bearing A. Perform section 5: "Removal of Drive Screw" B. On thrust bearing plate, remove (4) retaining bolts holding thrust bearing cover to mounting bracket using 7/16" wrench. C. NOTE GREASE FITTING ORIENTATION.
RkJQdWJsaXNoZXIy MTA3MzU=