Hog Slat Inc. Newton Grove, NC USA February 2019 24 Ventilation System G. To replace pulleys/sprockets, remove lock nuts securing pulleys/sprockets to bracket using a 17mm wrench/socket. H. It will be necessary to hold one side while removing the opposite side nut. I. Re-assembly of pulley/sprocket in reverse order. 8.2 Installation of Cable Pulley/Sprocket assembly. A. Install Cable Pulley/Sprocket assembly in reverse order. B. Re-connect power. Section 9: Limit Switch Enclosure Removal/Installation - HS583E series Tools Required: 5/16" socket/wrench/drilldriver 1/8" Allen wrench #2 Phillips screwdriver 11/32" socket / wrench
RkJQdWJsaXNoZXIy MTA3MzU=