Hog Slat Inc. Newton Grove, NC USA February 2019 27 Ventilation System previously removed fasteners. I. Re-install end cap to end of machine chassis and secure with previously removed fasteners. J. Plug motor leads into wiring harness match plug. Plugs are polarized and should fit only one way. K. Re-connect power. Section 10: Limit Switch Removal/Installation - HS583E series Tools Required: 5/16" socket/wrench/drilldriver #2 Phillips screwdriver 11/32" socket / wrench 5/8" deep well socket 3/8" socket 10.1 Removal of Limit Switch A. Remove limit switch enclosure. Refer to section 9.1: "Removal of Limit Switch Enclosure". B. Remove (4) fasteners securing the small enclosure lid containing the toggle switch controls. Use 5/16" socket/wrench/drill driver. C. Remove each toggle switch from small cover using 5/8" deep well socket or wrench. -Note location of each toggle switch.
RkJQdWJsaXNoZXIy MTA3MzU=