Hog Slat Inc. Newton Grove, NC USA February 2019 28 Ventilation System D. Remove nuts that secure all (3) green bonding wires from green ground post in the bottom of the enclosure. Requires 3/8" socket/drill driver. Note the order of removal of each bonding wire for re-installation. E. Remove (2) screws securing the terminal block bracket to the bottom of the enclosure using #2 Phillips screwdriver. F. Remove (4) screws/nuts that secure the limit switch assembly to the side of the enclosure. Use #2 Phillips screwdriver.
RkJQdWJsaXNoZXIy MTA3MzU=