Hog Slat Inc. Newton Grove, NC USA February 2019 8 Ventilation System G. Loosen set-screw on plastic collar found at the base of the drive screw so the collar can be rotated by hand. Use 1/8” Allen wrench. H. Leave Allen wrench inserted in set-screw. Rotate drive screw CCW by the jaw coupling end. I. Allow Allen wrench to rest on the side of the chassis stopping the rotation of the plastic collar. J. Continue to rotate the drive screw CCW. Shaft will unscrew itself out of the load nut.
RkJQdWJsaXNoZXIy MTA3MzU=