Hog Slat Inc. Newton Grove, NC USA March 2024 6 HS597 HOPPER LEVEL CONTROL Wiring: The HS597 Hopper Level Control is a single pole, double throw switch connected so that the circuit is normally closed (Motor Runs) when there is no feed present against the paddle. The circuit is open (Motor Stops) when there is feed against the paddle. The HS597 internal switch is rated for 20 amps @ 125V/250VAC. It can be directly connected in series to control a motor up to the following ratings. Maximum Ratings: 1 ½ HP @230VAC ¾ HP @ 115VAC Resistive load = 20 amps. If larger motor size is used or resistive load greater than 20 amps, the Hopper Level Control must be connected to a relay/contactor. Wiring for use with GrowerSELECT HS593 Control unit or CTB 6500 Control Unit
RkJQdWJsaXNoZXIy MTA3MzU=