GrowerSELECT - HS667-06 Linear Actuator Load Nut Replacement Manual

Hog Slat Inc. Newton Grove, NC USA June 2019 7 Ventilation Systems 16. Thread NEW LOAD NUT (HS667-06) onto shaft until it is approximately 3” from the end of the housing as shown. 17. Re-install plastic spacer and nut on the end of the thread shaft. Hold firmly threaded shaft and tighten nut with impact driver. 18. Slide output tube over threaded rod. While holding the newly installed load nut, thread output tube onto load nut.