GrowerSELECT - HS667-06 Linear Actuator Load Nut Replacement Manual

Hog Slat Inc. Newton Grove, NC USA June 2019 9 Ventilation Systems 23. Align outer tube with splines on load nut and the marks made on the housing and tube in step 4. Careful to rotate the load nut no more than necessary. LESS THAN ½ TURN. 24. Position the output tube so output end is lying flat (hole side up) with the motor/gear lying flat on the bench. 25. Slide the outer tube up to the gear housing while aligning marks and the mounting holes.