GrowerSELECT - HS740 Autotmatic Curtain Controller Installation Manual

Hog Slat Inc. Newton Grove, NC USA August 2019, REV A4 3 Ventilation Systems DO NOT CONNECT MORE THAN ONE CURTAIN /ACTUATOR MACHINE PER CIRCUIT. Electrical Connections: Screw terminals. Use minimum 90°C COPPER CONDUCTORS ONLY. USE NON-RIGID CONDUIT ONLY. Installation Instructions: 1. Select location to mount controller. Location should provide adequate ventilation, and safe and easy access. 2. The controller is recommended to be mounted vertically. 3. Mount controller using the four mounting holes found on the outside corners of the enclosure. 4. Wire controller per wiring instructions below. Installation of liquid tight connectors or non-metallic conduit through bottom of enclosure is recommended. DO NOT DRILL HOLES IN TOP OF ENCLOSURE. Wiring Instructions: A. Output to HS583 Series curtain machine