Hog Slat Inc. Newton Grove, NC USA HSART-517 (October 2019) REV A1 1 Water Systems HS762 10-25 PSI Water Regulator Installation Guide 1. Use included Teflon tape on 3/4” NPT fittings when plumbing in. Direction of flow is noted on top of the assembly by “INLET” and “OUTLET”. DO NOT USE pipe compound on the threads. 2. Use the included Teflon tape on the pressure gauge and tighten it securely to the regulator top. DO NOT USE pipe compound on the threads. CAUTION INLET PRESSURE SHOULD NOT EXCEED A MAXIMUM OF 40 PSI. DO NOT ALLOW REGULATOR TO COME IN CONTACT WITH ALCOHOLS, PETROLEUM, OR CORROSIVE CHEMICALS.
Hog Slat Inc. Newton Grove, NC USA HSART-517 (October 2019) REV A1 2 Water Systems COMPONENTS ITEM PART # DESCRIPTION 1 61038 PRESSURE GAUGE 0-30 PSI 2 HS762-14 HOUSING TOP ASSEMBLY 3 HS762-13 SEAL, WATER REGULATOR 4 HS762-5 PIVOT BLOCK 5 HS762-4 PIVOT ARM 6 HS762-6 DIAPHRAGM BOLT 7 11112796 #8-16 x 1/2" STAINLESS STEEL SCREW 8 HS762-7 DIAPHRAGM 9 HS762-3 DIAPHRAGM PLATE 10 606240 NUT, 5/16-18 STAINLESS STEEL 11 HS762-8 SPRING 12 HS762-11 ADJUSTMENT ASSEMBLY 13 HS762-9 ADJUSTMENT KNOB WASHER 14 HS762-12 REDUCER RING 15 HS762-2 HOUSING BOTTOM 16 HS762-15 DIAPHRAGM ASSEMBLY 17 HS762-16 PIVOT ARM ASSEMBLY W/ SEAL
hogslat.comRkJQdWJsaXNoZXIy MTA3MzU=