GrowerSELECT - HS783 Fan Pulley Laser Alignment Kit Instruction Manual

Hog Slat Inc. Newton Grove, NC USA January 2019 2 Ventilation Systems 8. Adjust the Motor pulley on the shaft so that the red dot of the laser falls on the yellow indention of the target. 9. Repeat Step 5 and 6 for the Motor pulley. Pulley Groove Gauge The target piece contains a simple pulley V-groove gauge that can be used to quickly check pulley wear by simply inserting into the V-groove on any ½” (A type) pulley. If the gauge either bottoms out on small end of V-groove or you can see daylight along tapered sides of V-groove; the pulley is worn and should be replaced. Worn pulley can affect fan efficiency and shorten belt life. Battery Replacement Hog Slat, Inc. PO Box 300 Newton Grove, NC 28366 Phone: (910) 594-0219 Fax: (910) 594-1392 www.hogslat.com Copyright © 2017 by Hog Slat, Inc. Part Number: HSMANUAL-146 Rev A1 Market: Poultry and Hog Trl/aw FIGURE 2: PLACEMENT IN FAN